User Guide
Table Of Contents
- Package Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Quick Installation Guide
- Chapter 4 Configure the Device
- Appendix A: Application Example
- Appendix B: Factory Defaults
- Appendix C: Troubleshooting
- Appendix D: Specifications
- Appendix E: Glossary
TL-WA901ND
450Mbps Wireless N Access Point User Guide
Note:
If the above screen does not prompt, it means that your web-browser has been set to a proxy.
Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that
appears, cancel the Using Proxy checkbox, and click OK to finish it.
2. After successfully logging in, the Quick Setup page will display. Click Next to continue.
Figure 3-3 Quick Setup
3. The Quick Setup Start page will display. Click Next to continue.
Figure 3-4 Quick Setup
Note:
By selecting YES for Change the login account, you can modify your login user name and
password. In this case, it is suggested that you record them in some place easy to find.
4. The Operation Mode page will appear then, shown in Figure 3-5. The TL-WA901ND
supports up to five operation modes.
Figure 3-5 Operation Mode
10