User Guide
Table Of Contents
- Package Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Quick Installation Guide
- Chapter 4 Configure the Device
- Appendix A: Application Example
- Appendix B: Factory Defaults
- Appendix C: Troubleshooting
- Appendix D: Specifications
- Appendix E: Glossary
TL-WA901ND
450Mbps Wireless N Access Point User Guide
In Access Point mode, the product will act as a wireless central hub for your wireless
LAN clients, giving a wireless extension for your current wired network.
In Repeater(Range Extender) mode, the product can extend the coverage of your main
Router/AP.
In Bridge with AP mode, the product can wirelessly connect two or more remote LANs
together.
In Client mode, the product will act as a wireless adapter to connect your wired devices
(e.g. IPTV Set-top-box, Smart TVs, Game Consoles, DVD and Blu-ray Players, etc.) to a
wireless network.
In Multi-SSID mode, the product can be assigned up to four SSIDs to work with your
VLAN.
5. Select the operation mode based on your need.
A. When you choose Access Point mode, the Wireless Settings page will be shown in Figure
3-6.
Figure 3-6 Wireless Setting - Access Point mode
1) Create an easy-to-remember and distinguish name for your wireless network, write it into
Wireless Network Name(SSID).
2) Select Channel for your device.
3) It's recommended select Most Secure (WPA/WPA2-PSK) encryption mode and enter a
password below to prevent unauthorized access to your AP.
4) Click Next, you will then come to Network Setting page for furthers configuration.
B. When you choose Repeater (Range Extender) mode, the AP will detect the wireless
networks in your neighborhood, and then the window displaying a list of available SSIDs will
appear in Figure 3-7.
11