User Guide
Table Of Contents
- Package Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Quick Installation Guide
- Chapter 4 Configure the Device
- Appendix A: Application Example
- Appendix B: Factory Defaults
- Appendix C: Troubleshooting
- Appendix D: Specifications
- Appendix E: Glossary
![](/manual/tp-link/tl-wa901nd-v4/user-guide-english/images/img-17.png)
TL-WA901ND
450Mbps Wireless N Access Point User Guide
Figure 3-7 AP List
1) Find the SSID of the Access Point / Router or WISP which you want you to connect to, and
click Connect in the corresponding row. You will then see the page shown in Figure 3-8.
2) Select the security mode and enter the password that is the same as on your router or
access point in Figure 3-8.
3) Click Next, you will then come to Network Settings page for furthers configuration.
Figure 3-8 Wireless Setting – Repeater (Range Extender) mode
C. When you choose Bridge with AP mode, the AP will detect the wireless networks in your
neighborhood, and then the window displaying a list of available SSIDs will appear in Figure
3-9.
12