User Guide
Table Of Contents
- Package Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Quick Installation Guide
- Chapter 4 Configure the Device
- Appendix A: Application Example
- Appendix B: Factory Defaults
- Appendix C: Troubleshooting
- Appendix D: Specifications
- Appendix E: Glossary
TL-WA901ND
450Mbps Wireless N Access Point User Guide
D. When you choose Client mode, the AP will detect the wireless networks in your
neighborhood, and then the window displaying a list of available SSIDs will appear in Figure
3-11.
Figure 3-11 AP List
1) Find the SSID of the Access Point / Router or WISP which you want you to connect to, and
click Connect in the corresponding row. You will then see the page shown in Figure 3-12.
2) Select the security mode and enter the password that is the same as on the main
Router/AP.
3) Click Next, you will then come to Network Settings page for furthers configuration.
Figure 3-12 Wireless Setting – Client mode
E. When you choose Multi-SSID mode, the Wireless Settings page will be shown in Figure
3-13.
14