User Guide
Table Of Contents
- Package Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Quick Installation Guide
- Chapter 4 Configure the Device
- Appendix A: Application Example
- Appendix B: Factory Defaults
- Appendix C: Troubleshooting
- Appendix D: Specifications
- Appendix E: Glossary
TL-WA901ND
450Mbps Wireless N Access Point User Guide
Figure 3-13 Wireless Setting – Multi-SSID mode
You are suggested to implement Multi-SSID function with a switch that supports Tag VLAN
feature.
For advanced configuration of this step, please refer to explanations of this mode in
4.6.1
Wireless Settings.
6. When you have configured Wireless Settings in step 4, The Network Settings page will
appear then, shown in Figure 3-14. It is recommended that you keep the default settings on
this page.
Figure 3-14 Network Setting
Note:
These settings are only for basic wireless parameters, for advanced settings, please refer to
4.5 Network
.
15