User Guide

TL-WN7200ND 150Mbps High Power Wireless USB Adapte
r
12
Figure 3-6
3.2 To connect using QSS
QSS function allows you to add a new wireless device to an existing network quickly.
If the wireless router supports QSS (or WPS), you can establish a wireless connection between
wireless card and router using either Push Button Configuration (PBC) method or PIN method.
Three QSS connection methods are listed in the following parts.
3.2.1 PBC (Push Button Configuration) method
1. Press the QSS button on the back panel of the router. Here we use router TL-WR741ND
as an example.
Figure 3-7
2. Press the QSS/ WPS button on the adapter. There are two ways:
1) Press and hold the QSS button on the adapter directly for 2~3 seconds until Figure 3-9
appears.