Quick Installation Guide

SSID:TP-LINK_XXXX

SSID:TP-LINK_XXXX_5G

Wireless Password:XXXXXXXX

Ethernet Cable

Extender

TL-WPA7617

Adapter

TL-PA7017P

Powerline

Plug the adapter into a power outlet

and connect it to the router’s LAN

port via an Ethernet cable.

Tip:

Want to unify or personalize your network? See the back

page for instructions.

Plug the extender into a power outlet on the same electrical circuit.

Wait until the extender’s Powerline LED turns on.

Note: If the LED is o, please refer to FAQ > Q2.

Connect your devices to the internet using the default SSID (network

name) and password on the label at the top of the extender.

Attention

2. Plug powerline devices into wall outlets instead of power strips.

Note: Using power strip will aect network performance or even cause connection drops.

1. Use the product only in the upright direction.

Wall Outlet Power Strip

Quick Installation Guide

Plug and Play

Router

WAN LAN

* TL-WPA7617 KIT (European version) is used for demonstration in this guide.

* Images may dier from actual products.

SSID:TP-Link_XXXX

SSID:TP-Link_XXXX_5G

Wireless Password:XXXXXXXX

SSID:TP-LINK_XXXX

SSID:TP-LINK_XXXX_5G

Wireless Password:XXXXXXXX

PAGE 1
2 3 * TL-WPA7617 KIT (European version) is used for demonstration in this guide. * Images may differ from actual products. Extender TL-WPA7617 Plug and Play On Connect your devices to the internet using the default SSID (network name) and password on the label at the top of the extender. SSID:TP-Link_XXXX SSID:TP-Link_XXXX_5G Wireless Password:XXXXXXXX Tip: Want to unify or personalize your network? See the back page for instructions. port via an Ethernet cable.
PAGE 2
Physical Appearance Unify Your Wi-Fi Networks via WPS Copy SSID and password from your router via WPS to create one unified Wi-Fi network throughout your home. Note: If your router doesn’t have a WPS button, manually change the extender’s Wi-Fi settings via the tpPLC app, tpPLC Utility, or web interface. 1 Plug in the extender in the same room as your router. Wait WPS turns on. 2 Press your router’s WPS button. Within 2 minutes, press the Ethernet Port Blinking extender’s Wi-Fi button for 1 second.