Operation Manual

TL-WR1043ND 300Mbps Wireless N Gigabit Router
-12-
Figure 3-6 Choose WAN Connection Type
The router provides Auto-Detect function and supports five popular ways Dynamic IP,
Static IP, PPPoE, L2TP/Russian L2TP and PPTP/Russian PPTP to connect to the Internet.
It’s recommended that you make use of the Auto-Detect function. If you are sure of what
kind of connection type your ISP provides, you can select the very type and click Next to go
on configuring.
1. If you select Auto-Detect, the router will automatically detect the connection type your ISP
provides. Make sure the cable is securely plugged into the Internet port before detection. The
appropriate configuration page will be displayed when an active Internet service is
successfully detected by the router.
a) If the connection type is Dynamic IP, click Next you can go on with the wireless
configuration.
b) If the connection type is Static IP, the next screen will appear as shown in Figure 3-7.
Configur
e the following parameters and then click Next to continue.
Figure 3-7 Quick Setup - Static IP