User Guide

TL-WR1043ND
450Mbps Wireless N Gigabit Router
Figure 3-6 Choose WAN Connection Type
The router provides Auto-Detect function and supports five popular ways Dynamic IP,
Static IP, PPPoE, L2TP/Russian L2TP and PPTP/Russian PPTP to connect to the Internet.
It’s recommended that you make use of the Auto-Detect function. If you are sure of what
kind of connection type your ISP provides, you can select the very type and click Next to go
on configuring.
If you select Auto-Detect, the router will automatically detect the connection type your ISP
provides. Make sure the cable is securely plugged into the Internet port before detection. The
appropriate configuration page will be displayed when an active Internet service is
successfully detected by the router.
a) If the connection type detected is Dynamic IP, the next screen will appear as shown in
Figure 3-7. Please select to clone the MAC address or not, according to your situation.
Figure 3-7 Quick Setup – MAC Clone
-12-