User Guide

To log in to the web management page of the router, open the web browser and
input http://tplinkwifi.net:
Type the log in username and password and click ok. The default username and password are
both admin.
Step 4:
After you log in, check the WAN part on the Status page. See if an IP address is listed. If so,
that means the router is successfully configured and connected to the Internet:
If there is no IP address listed, please check the physical connection or call your service provider
to check the line.
Step 5:
If there is IP address on the WAN part on the Status page, test the connect by pinging a public IP
address (like 8.8.8.8). If this fails, please release/renew the WAN IP address. If successful,
please check if you can browse to any website. If you can’t, you may need to change your DNS
servers. Please go to DHCP->DHCP Settings and type in 8.8.8.8 for the primary and 8.8.4.4 for
the secondary then, click Save.