User Guide

Step 3:
After logged in, check the WAN part on the Status page, if it shows an IP address (similar as below), that means
the router is successfully configured and connected to the Internet:
If there is no IP address, please check the physical connection or call Service Provider to check the line.
Step 4:
If there is IP address on the WAN part of the Status page, please open the Terminal on your MAC to check whether
you can ping a public IP address (like 8.8.8.8). If can’t, please release/renew the WAN IP address.
If can, please check whether you can open any website. If can’t, it may caused by DNS server. Please go to DHCP-
>DHCP Settings page and type in 8.8.8.8 for primary DNS, 8.8.4.4 for secondary. click Save.