Quick Installation Guide

Connecting the Hardware

Turn on the modem, and

then wait 2 minutes for

it to restart.

Connect the modem to the

Internet port on your router with

an Ethernet cable.

If your Internet connection is through an Ethernet cable from the wall

instead of through a DSL / Cable / Satellite modem, connect the Ethernet

cable directly to the router’s WAN port.

Connect to

the computer

Modem

Power adapter

7106505289 REV6.0.1

Turn off the modem,

and remove the backup

battery if it has one.

Internet

Turn on the router.

Quick Installation Guide

300Mbps Wireless N Router

Power

WLAN

Flashing

WAN

On/Flashing

Verify that the hardware

connection is correct by

checking these LEDs.

Note: If the WLAN LED is not ashing,

please press the WIFI ON/OFF button for

4 seconds.

WR841N / TL

WR841ND

PAGE 1
Quick Installation Guide 300Mbps Wireless N Router TL-WR841N / TL-WR841ND 7106505289 REV6.0.1 Connecting the Hardware If your Internet connection is through an Ethernet cable from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the router’s WAN port. Power adapter Connect to the computer Internet Power adapter 4 1 Turn off the modem, and remove the backup battery if it has one.
PAGE 2
Configuring the router Tether App 1. Connecting your computer to the router (Wired or Wireless) Wired C Verify or Change the Wireless Network Settings. Click ‘Next’ to continue. Note: You may rename your wireless network name and create your own password. If you do, please note down the new wireless network name and password. TP-LINK's Tether app lets you conveniently access the router and: View information about the clients on your network. Block network access from specific users or devices.