User Guide

TL-WR841N/TL-WR841ND
300Mbps Wireless N Router
-4-
1.4 Panel Layout
1.4.1 The Front Panel
The router’s LEDs are located on the front panel (View from left to right).
Name Status Indication
（Power）
Off Power is off.
On The router has finished booting.
Flash
The router is booting or upgrading.
(WLAN)
Off The Wireless function is disabled.
On The Wireless function is enabled.
(LAN 4-1)
Off There is no device linked to the corresponding port.
On There is a device linked to the corresponding port.
(WAN)
Off
There is no device linked to the WAN port.
Orange
A device is connected to the WAN
port, but there is no
activity.
Green A device is connected to the WAN port, and is active.
(WPS)
Slow Flash
A
wireless device is connecting to the network by WPS
function. This process will last in the first 2 minutes.
On
A
wireless device has been
successfully added to the
network by WPS function.
Quick Flash
A wireless device failed to be added to the network by
WPS function.

Note:
After a device is successfully added to the network by WPS function, the WPS LED will keep on
for about 5 minutes and then turn off.