User Guide

TL-WR841N/TL-WR841ND
300Mbps Wireless N Router
-21-
 WPS Status - Enable or disable the WPS function here.
 Current PIN - The current value of the router's PIN is displayed here. The default PIN of the
router can be found in the label attached on the router.
 Restore PIN - Restore the PIN of the router to its default.
 Gen New PIN - Click this button, and then you can get a new random value for the router's
PIN. You can ensure the network security by generating a new PIN.
 Disable PIN of this device - You can disable the router’s PIN manually here. If the router
receives multiple failed attempts to authenticate an external registrar, this function will be
disabled automatically.
 Add Device - You can add a new device to the existing network manually by clicking this
button.
b). To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and router using either Push Button Configuration (PBC)
method or PIN method.

Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
I. Use the Wi-Fi Protected Setup Button
Use this method if your client device has a Wi-Fi Protected Setup button.
Step 1: Press the WPS/RESET button on the back panel of the router for one second.
You can also keep the default WPS Status as Enabled and click the Add Device button,
then Choose “Press the button of the new device in two minutes” and click Connect.
(Shown in the following figure)