User Guide

TL-WR841N/TL-WR841ND
300Mbps Wireless N Router
-34-
 IP Address - Enter the IP address of your router or reset it in dotted-decimal notation
(factory default: 192.168.0.1).
 Subnet Mask - An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
 IGMP Proxy - If you want to watch TV through IGMP, please Enable it.

Note:
1. If you change the IP Address of LAN, you must use the new IP Address to login the router.
2. If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP
server will change accordingly at the same time，while the Virtual Server and DMZ Host will
not take effect until they are re-configured.
4.6 Wireless
There are five submenus under the Wireless menu: Wireless Settings, Wireless Security,
Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click any of them, and
you will be able to configure the corresponding function.
4.6.1 Wireless Settings
Choose menu “Wireless
→
Wireless Setting”, you can configure the basic settings for the
wireless network on this page.