User Guide

Chapter 4

Configure the Router in Wireless Router Mode

• Operation Mode - The current wireless working mode in use.

• Wireless Radio - Indicates whether the wireless radio feature of the router is

enabled or disabled.

• Name(SSID) - The SSID of the router.

• Mode - The current wireless mode which the router works on.

• Channel - The current wireless channel in use.

• Channel Width - The current wireless channel width in use.

• MAC Address - The physical address of the router.

• WAN - This field displays the current settings of the WAN, and you can configure them

on the Network > WAN page.

• MAC Address - The physical address of the WAN port.

• IP Address - The current WAN (Internet) IP Address. This field will be blank

or 0.0.0.0 if the IP Address is assigned dynamically and there is no internet

connection.

• Subnet Mask - The subnet mask associated with the WAN IP Address.

• Default Gateway - The Gateway currently used is shown here. When you use

Dynamic IP as the internet connection type, click Renew or Release here to

obtain new IP parameters dynamically from the ISP or release them.

• DNS Server - The IP addresses of DNS (Domain Name System) server.

• System Up Time - The length of the time since the router was last powered on or

reset.

Click Refresh to get the latest status and settings of the router.

4. 2. Operation Mode

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the

router.

2. Go to Operation Mode.

3. Select the working mode as Wireless Router and click Save.