User Guide

Chapter 4

Configure the Router in Wireless Router Mode

after a specified inactivity period (Max Idle Time) and not be able to re-establish

when you attempt to access the internet again.

• Authentication Type - Choose an authentication type.

Note:

Sometimes the connection cannot be terminated although you have specified the Max Idle Time because some

applications are visiting the internet continually in the background.

• Service Name/Server Name - The service name and server name should not be

configured unless you are sure it is necessary for your ISP. In most cases, leaving

these fields blank will work.

• MTU(Bytes) - The default MTU size is 1480 bytes. It is not recommended that you

change the default MTU size unless required by your ISP.

• Use IP Address Specified by ISP - If your ISP does not automatically assign IP

addresses to the router, please select this item and enter the IP address provided by

your ISP in dotted-decimal notation.

• Echo Request Interval - The router will detect Access Concentrator online at every

interval. The default value is 0. You can input the value between 0 and 120. The value

0 means no detect.

• Set DNS Server Manually - If your ISP does not automatically assign DNS addresses to

the router, please select this item and enter the IP address in dotted-decimal notation

of your ISP’s primary DNS server. If a secondary DNS server address is available,

enter it as well.

L2TP

If your ISP provides L2TP connection, please select L2TP.