User Guide

Chapter 4

Configure the Router in Wireless Router Mode

7. Select Allow the packets specified by any enabled access

control policy to pass through the Router as the default filter

policy and click Save.

Now only the specific host(s) can visit the target(s) within the

scheduled time period.

4. 11. Advanced Routing

Static Routing is a form of routing that is configured manually by a network administrator

or a user by adding entries into a routing table. The manually-configured routing

information guides the router in forwarding data packets to the specific destination.

4. 11. 1. Static Route List

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the

router.

2. Go to Advanced Routing > Static Route List.

¾ To add static routing entries:

1. Click Add New.

2. Enter the following information.

• Destination IP Address - The Destination Network is the address of the network

or host that you want to assign to a static route.

Done!