User Guide

TL-WR842ND 300Mbps Multi-Function Wireless N Router
- 4 -
1.4 Panel Layout
1.4.1 The Front Panel
Figure 1-1 Front Panel sketch
The Router’s LEDs are located on the front panel (View from left to right).
Name Status Indication
Off
The device has a system error.
On
The device is initialising.
（SYS）
Flashing The device is working properly.
Off The wireless function is disabled.
(Wireless)
Flashing The wireless function is enabled.
Off There is no device linked to the corresponding port.
On
There is a device linked to the corresponding port but there is
no activity.
(LAN 1-4)
(Internet)
Flashing There is an active device linked to the corresponding port.
Off No storage device or printer is plugged into the USB port.
(USB)
On A storage device or printer has connected to the USB port.
Slow Flash
A wireless device is connecting to the network by WPS
function. This process will last in the first 2 minutes.
On
A wireless device has been successfully added to the network
by WPS function.
(WPS)
Quick Flash
A wireless device failed to be added to the network by WPS
function.
Table 1-1 The LEDs Description