User Guide

TL-WR842ND 300Mbps Multi-Function Wireless N Router
- 14 -
Figure 3-9 Quick Setup – MAC Clone
z If you are visiting the Router from another computer, rather than the main computer,
please select No, and then enter the main computer’s MAC in the field WAN MAC
Address.
Figure 3-10 Quick Setup – MAC Clone
)
Note:
1. It’s strongly recommended that you visit and configure the Router from the main
computer.
2. To find the main computer’s MAC, please go to Start > Run on your main computer,
type in cmd and press Enter. At the command prompt, enter ipconfig/all and press
Enter. The MAC will be displayed under Physical Address.（shown in the following
figure）