User Guide

TL-WR940N/TL-WR941ND
450Mbps Wireless N Router
1.4 Panel Layout
1.4.1 The Front Panel
Figure 1-1 Front Panel sketch
The Router’s LEDs and the WPS button are located on the front panel (View from left to right).
Name Status Indication
(Power)
Off Power is off.
On Power is on.
(Wireless)
Off The Wireless function is disabled.
On
The Wireless function is working properly.
(Ethernet)
On
There is d
evice(s) connected to the Ethernet (1/2/3/4)
port(s).
Off No device is connected to the Ethernet (1/2/3/4) port.
(Internet)
Blue
The Internet port is connected, and
the Internet is
accessible.
Orange
The Internet port is connected, but the Internet is
inaccessible.
Off
The Internet port isn’t connected, and the Internet is
inaccessible.
(WPS)
Flashing
WPS button on the router is pressed, and the router is
trying to connect a wireless device to its network via WPS.
On The connection via WPS is successful.
Off The connection via WPS fails.
Table 1-1 The LEDs description

Note:
After a device is successfully added to the network by WPS function, the WPS LED will keep on
for about 5 minutes and then turn off.
4