User Guide

TL-WR940N/TL-WR941ND
450Mbps Wireless N Router
Figure 4-66 Bandwidth Control Settings
 Enable Bandwidth Control - Check this box so that the Bandwidth Control settings can take
effect.
 Line Type - Select the right type for you network connection. If you don’t know how to choose,
please ask your ISP for the information.
 Egress Bandwidth - The upload speed through the WAN port
.
 Ingress Bandwidth - The download speed through the WAN port.
4.13.2 Rules List
Choose menu “Bandwidth Control
→
Rules List”, and then you can view and configure the
Bandwidth Control rules in the screen below.
Figure 4-67 Bandwidth Control Rules List
 Description - This is the information about the rules such as address range.
 Egress bandwidth - This field displays the max and mix upload bandwidth through the WAN
port, the default is 0.
 Ingress bandwidth - This field displays the max and mix download bandwidth through the
WAN port, the default is 0.
 Enable - This displays the status of the rule.
 Modify - Click Modify to edit the rule. Click Delete to delete the rule.
To add/modify a Bandwidth Control rule, follow the steps below.
1. Click Add New… shown in Figure 4-67, you will see a new screen shown in Figure 4-68.
2. Enter the information like the screen shown below.
70