Installation Instructions

If your internet connection is through an Ethernet cable directly from

the wall instead of through a DSL / Cable / Satellite modem, connect

the Ethernet cable to the router’s WAN port, then follow Step 4 and 5

to complete the hardware connection.

Conrm that the LED ( )

is on and solid to verify

the hardware connection

is correct.

Connect the Hardware

Internet

Connect the modem to the

router’s WAN port with an

Ethernet cable.

Turn o the modem,

and remove the backup

battery if it has one.

Turn on the modem, and

then wait about 2 minutes

for it to restart.

Router

Modem

Power adapter

Connect the power adapter

to the router and turn on the

router.

Quick Installation Guide

450Mbps Wireless N Router

TL-WR945N

PAGE 1
Quick Installation Guide 450Mbps Wireless N Router TL-WR945N Connect the Hardware If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable to the router’s WAN port, then follow Step 4 and 5 to complete the hardware connection. Power adapter 4 Router Internet Power adapter 1 Turn off the modem, and remove the backup battery if it has one.
PAGE 2
Configure the Router B Follow the step-by-step instructions of the Quick Setup to complete the initial configuration. 1. Connecting your computer to the router (Wired or Wireless) Note: If you are not sure of the WAN Connection Type, please click Auto-Detect. The TP-LINK router supports various features, such as Guest Network, Parental Controls, Access Control and more. You can log in to the router’s web management page http://tplinkwifi.net to apply these functions.