Download

Connect the Hardware

Verify the Hardware

Connection

Enjoy the Internet

Note: If the Internet LED does not turn on, please refer to FAQ > Q2.

1 Install the 4G LTE antennas and

position them upwards.

3 Connect the power adapter to

the router and push in to turn on

the router.

For better internet connection, make sure 3 or 4 bars

of the Signal Strength LED are lit. Otherwise, try

relocating the router to a location that may receive a

stronger mobile internet signal, such as near a

window.

Wired: Connect your computers to the router's LAN ports via Ethernet cables.

Wireless: Connect wireless devices using the SSID (network name) and

Wireless Password printed on the product label at the bottom of the router.

2 Insert the SIM card into the slot until

you hear a click.

Note: Micro or Nano-SIM card must be

converted using a standard SIM card adapter

provided by TP-Link.

Wireless Archer MR400 Wired

Verify the hardware connection by checking the

following LEDs’ status. If the Internet LED is on, your

router is connected to the internet successfully.

Power

On On

Internet

Wireless

Quick Installation Guide

MR400

AC1350 Wireless Dual Band 4G LTE Router

PAGE 1
Quick Installation Guide AC1350 Wireless Dual Band 4G LTE Router MR400 Connect the Hardware 1 3 Verify the Hardware Connection Connect the power adapter to the router and push in to turn on the router. Verify the hardware connection by checking the following LEDs’ status. If the Internet LED is on, your router is connected to the internet successfully. Power On Internet On 2 Install the 4G LTE antennas and position them upwards. Insert the SIM card into the slot until you hear a click.
PAGE 2
Customize the 4G LTE Router 1. Make sure your computer is connected to the router (via wired or wireless). LED Indicators 3. Follow the step-by-step instructions of the Quick Setup to complete the initial configuration. On the Wireless Settings page, you can customize your 2.4GHz and 5GHz wireless network names and passwords. 2. Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1. Create a new password and click Let’s Get Started.