Installation Manual

Powerline

Quick Installation Guide

More: To add additional powerline

adapters or extenders with the default

settings, simply plug them into the wall

sockets on the same electrical circuit.

Wait until the Powerline

LED turns on.

Extender

(TL-WPA4220)

Adapter

(TL-PA4010)

Applicable to TL-WPA4220 and its multiple-pack kits

AV500 Powerline Wi-Fi Extender

7106505567 REV4.0.5

Plug and Play

Set Up a New Wireless Network

Router

WAN LAN

* TL-WPA4220 KIT (European version) is used for demonstration in this QIG.

Image may diﬀer from actual product.

Clone Your Router’s Wi-Fi Settings to the Extender (Recommended)

Note: If the Wi-Fi LED still blinks slowly for longer than 30 seconds, unplug the extender and plug

it back in, then try again. Or use “Customize the Extender’s Wi-Fi Settings” on the back instead.

If your router supports WPS, you can continue with the steps below to clone

its current Wi-Fi settings to the extender.

Tips: We recommend that you plug in the extender near your router for Wi-Fi cloning.

Press the WPS button

for 2 seconds.

Within 2 minutes, press the

Wi-Fi Clone button for 1 second.

2 Done.3

Blinks slowly for

about 10 seconds

Solid on for 5 seconds

and then blinks rapidly

WPSWAN LAN

Wireless Router

Use the default wireless network name

(SSID) and password on the provided

Wi-Fi Info Card to access the Internet.

Enjoy!

PAGE 1
Quick Installation Guide AV500 Powerline Wi-Fi Extender Applicable to TL-WPA4220 and its multiple-pack kits * TL-WPA4220 KIT (European version) is used for demonstration in this QIG. Image may differ from actual product. 7106505567 REV4.0.5 Plug and Play Set Up a New Wireless Network More: To add additional powerline adapters or extenders with the default settings, simply plug them into the wall sockets on the same electrical circuit. Wait until the Powerline LED turns on.
PAGE 2
Set Up a Secure Powerline Network Using the Pair Button (Recommended) You can create or join a secure powerline network using the Pair button on two devices at a time. The powerline network can support up to 16 powerline devices. Tips: We recommend that you plug in the powerline devices near each other when pairing. To create a secure powerline network: 1 Press the Pair button for 1 second. 2 To join an existing secure powerline network: 3 Within 2 minutes, press the Pair button for 1 second.