Download

Quick Start Guide

HS1XX Series

Support

If you encounter any issues during installation or

configuration, please visit www.tp-link.com/support for

web support and troubleshooting information.

7106506965 REV 1.0.1

Smart Wi-Fi Plug Installation

OR scan

QR code

1 Download TP-Link Kasa from the App Store or

Google Play.

2 Connect your mobile device to a 2.4GHz Wi-Fi

network.

3 Launch Kasa and follow the in-app instructions

to connect the Smart Plug to your network.

Note: The Smart Plug only supports the 2.4GHz networks.

Sketch 9:41 AM 100%

Power up your Smart Plug

Plug in your Smart Plug.

The Wi-Fi light will turn solid amber.

Sketch 9:41 AM 100%

DONE

Great!

Your Smart Plug is all set up. It is

now saved in your Device List.

Add Device

Sketch 9:41 AM 100%

Smart Plug

Smart Plug Mini

Smart Bulb

Smart Switch

Note: The U.S. plug version is used throughout the Kasa app.

PAGE 1
Quick Start Guide HS1XX Series Smart Wi-Fi Plug Installation 1 Download TP-Link Kasa from the App Store or Google Play. OR scan QR code 2 Connect your mobile device to a 2.4GHz Wi-Fi network. Note: The Smart Plug only supports the 2.4GHz networks. 3 Launch Kasa and follow the in-app instructions to connect the Smart Plug to your network. Sketch 9:41 AM 100% Add Device Sketch 9:41 AM 100% Sketch 9:41 AM 100% Power up your Smart Plug Plug in your Smart Plug.
PAGE 2
Smart Wi-Fi Plug Press and hold for 5 seconds or until the Wi-Fi LED blinks amber and green alternately to initiate the App-Config process. Press and hold for 10 seconds or until the Wi-Fi LED blinks amber rapidly to factory reset the Smart Plug. Blinking Amber and Green: App-Config mode initiated. Quick Blinking Green: Connecting to the network. Solid Green: Connected to the network. Quick Blinking Amber: Factory reset. Solid Amber: Rebooting. Solid Red: No network connection.