Installation Instructions

Quick Installation Guide
7106505340 REV3.0.0
Connect the Hardware
Register the Terminal
Connect to the Internet
1-Port Gigabit GPON Terminal
TX-6610
Establish your Internet connection according to the ISP's specific
instructions.
Note: If you need assistance, contact your ISP.
If the GPON LED is solid on, please skip to Connect to the Internet.
1
Open a browser and type http://192.168.1.1 in the address field. Use
admin for both username and password, and then click Login.
http://192.168.1.1
2
Go to Network Setting > PON Certification. Enter the GPON
Password and/or GPON SN provided by your ISP (Internet
Service Provider) to register the Terminal and click Save.
(0)characters
GPON Password
GPON Password(Notice: Maximum 10 ASCII characters)
Old Password:
New Password:
Save
GPON SN
GPON SN(Notice: Must be 16 Hexadecimal Numbers)
Old SN:
New SN:
Save
PON Certication
2
1
3
Internet
Verify that the hardware connection is correct
by checking these LEDs.
5
Power: On
GPON: On or Flashing
LOS: O
LAN: On or Flashing
Power
GPON
LOS
LAN
Power adapter
Fiber line
Ethernet cable
Terminal
4
ON/OFF POWER
RESET
GPON LAN
admin
Login
admin
Enjoy!