Operation Manual

TX-6610

1-Port Gigabit GPON Terminal User Guide

4.4.3 Factory Defaults

Choose menu “Management”  “Factory Defaults” and then you can restore the configurations

of the Terminal to its factory defaults on the following screen.

Figure 4-7

 Also erase current PON settings: Check this box, the current PON settings will be deleted

when you restore the configurations of the Terminal to its factory defaults.

Click the Restore button to reset all configuration settings to their default values.

• The default Username: admin

• The default Password: admin



Note:

All changed settings will be lost when defaults are restored.

4.4.4 Reboot

Choose menu “Management”  “Reboot” and then you can click the Reboot button to reboot the

Terminal via the next screen.

Figure 4-8