User Guide 10 Gigabit PCIe Network Adapter TX401 ©2020 TP-Link 1910012841 REV1.0.
Contents About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapter 1. Get to Know About Your Adapter . . . . . . . . . . . . . . . . . . . . . 2 1. 1. 1. 2. Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 LED Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Chapter 2.
About This Guide This guide is a complement to Quick Installation Guide. The Quick Installation Guide instructs you on quick installation, and this guide provides the product overview and detailed instructions for each steps. When using this guide, please notice that features available of the adapter may vary by model and software version. The adapter’s availability may also vary by region or ISP.
Chapter 1 Get to Know About Your Adapter This chapter introduces what the adapter can do and shows its appearance.
Chapter 1 1. 1. Get to Know about Your Adapter Product Overview Combined with the latest 10GBase-T Technology, TX401 delivers extreme speeds of up to 10 Gbps, which is 10× faster than typical Gigabit adapters, guaranteeing smooth data transmissions for all your bandwidth-intensive tasks. This will lead you to a new era of 10 Gbps home networking.
Chapter 2 Connect to a Computer This chapter introduces how to connect the adapter to your computer.
Chapter 2 Connect to a Computer Before you begin using your adapter, insert the adapter into your computer by following these steps. 1. Turn off the computer, unplug the power cable and remove the case panel. 2. Locate an available PCI-E slot and carefully insert the adapter. Note: If the bracket is not suitable for your computer, detach it from the adapter’s board and replace it with the low-profile bracket provided. 3. Replace the case panel, plug in the power cable and turn on your computer.
Chapter 3 Install Driver This chapter introduces how to install your adapter’s driver in different Windows systems, including Windows 7/8/8.1/10.
Chapter 3 Install Driver 1. Insert the CD and run the Autorun.exe. Note: 1. You can also download the driver or check the new release at https://www.tp-link.com/download-center 2. To install driver on Linux, refer to https://www.tp-link.com/faq-2868.html 2. Select your adapter to start driver installation. 3. Follow the instructions to complete the installation.
Appendix: Troubleshooting T1. What should I do if the adapter is not detected? • You could find and download the driver at https://www.tp-link.com/download-center T2. How to find the hardware version of the adapter? • The hardware version is printed on the product label on the package or the adapter. There is a character string “Ver:X.Y” (for example, Ver:2.0) in the Serial Number field, and the number X is the hardware version of the adapter. • Visit https://www.tp-link.com/faq-46.
2. Open the Device Manager and go to Network adapters, and then find the corresponding TP-Link adapter, right click it and then go to Properties; 3. If you can see “This device is working properly.” in the red box, you have already installed the driver successfully.
FCC compliance information statement Product Name: 10 Gigabit PCIe Network Adapter Model Number: TX401 Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: https://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2020.06.
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/ EU, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.
• 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆 蓋開口。 • 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉 位置中。 • 不要私自拆開機殼或自行維修，如產品有故障請與原廠或代理商聯繫。 限用物質含有情況標示聲明書 產品元件名稱 鉛 Pb 鎘 Cd 汞 Hg 限用物質及其化學符號 六價鉻 CrVI 多溴聯苯 PBB 多溴二苯醚 PBDE PCB ○ ○ ○ ○ ○ ○ 備考 1. " 超出 0.1wt %" 及 " 超出 0.01wt %" 系指限用物質之百分比含量超出 百分比含量基準值。 備考 2. "○" 系指該項限用物質之百分比含量未超出百分比含量基準值。 Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України.
Explanation of the symbols on the product label Symbol Explanation For indoor use only RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
