Installation Manual

Quick Installation Guide
Bluetooth 4.0
Nano USB Adapter
Images are for demonstration only.
For Windows XP/7
2 Install Bluetooth Driver
a. Download the driver at
https://www.tp-link.com/download-center
c. Follow the onscreen instructions to install
the driver. During the installation, change
Discovery Mode to Discovery ON.
Discovery Mode Discovery ON
d. Once the process is nished, restart your
computer to complete installation.
Note:
If you can’t install the driver successfully, disable the
antivirus software and firewall, then try again.
3 Pair With Bluetooth Devices
a. Right-click (Bluetooth) icon on the
menu bar and select Add Bluetooth
Device.
Notes:
1. Make sure your Bluetooth device is set to be
discoverable.
2. If the Bluetooth icon doesn’t appear, refer to FAQ->Q1.
b. Select your Bluetooth device from the list
and click Next. Follow the onscreen
instructions to complete pairing.
Jack’s Pad MouseAnna’s Phone
Add Bluetooth Device
Next Cancel
1 Connect to a Computer
Insert the adapter into a USB port on your
computer directly.
Note:
Before you proceed, please disable all existing Bluetooth
devices (both built-in and third party) on your computer.
b. Unzip the downloaded folder and run
Setup.exe.
Show Bluetooth Device
Add Bluetooth Device

Summary of content (2 pages)