User Guide

Quick Installation Guide
AC1750 Wireless Dual Band DOCSIS 3.0
Cable Modem Router
7106506155 REV2.0.1
1. Keep the power on at all times during this process.
2. If the Internet LED is blinking or off, call your Internet service provider’s
customer service.
3. If the wireless LED is off, press the WiFi ON/OFF button on the back panel,
then check the LEDs again.
Connect the Hardware
Activate the Modem Router
Enjoy the Internet
If you want to customize the wireless network, please filp this
piece of paper to see detailed instructions.
2
3
1
1
Wait for about 1 minute until the following LEDs are solid on.
Notes:
Connect the coaxial cable and power adapter to the modem
router, then power on your modem router.
Connect your computer to the modem router via a wired or
wireless connection.
Connect the computer to the modem router’s LAN port via an Ethernet cable.
On your computer, select and connect to the modem router’s wireless network.
The default wireless network name (SSID) and password are printed on the
product label at the bottom of the modem router.
Or you can set up a connection via the WPS button, which is on the back panel
of the modem router. For more information about WPS, refer to the User Guide at
www.tp-link.com.
Wired:
Wireless:
If the Internet is not accessible, contact your Internet service provider and make sure that the
modem router is activated.
Note:
Get your Internet service account information and the modem
router’s product label ready for activating your modem router. To
access the Internet, the modem router needs to be activated.
Comcast Xfinity www.comcast.com1-800-934-6489
1-855-704-4503 www.timewarnercable.comTime Warner Cable
The contact information listed might change. You can also find the contact number
in your monthly Internet service billing statement.
For Comcast and Time Warner Cable (TWC):
If your computer is configured with a fixed IP, change it to
“obtain an IP address dynamically”.
Launch a web browser, and visit any website. You will be
automatically redirected to your service provider’s self-activation
page.
Follow the on-screen self-activation instructions to activate the
modem router. If the self-activation page does not show up,
please call your service provider’s customer service to activate
the modem router.
2
After activating your modem router successfully, wait for about 10
minutes till these LEDs become solid on, then you can enjoy
the Internet.
MAC:XX-XX-XX-XX-XX-XX
Wireless Password/PIN:XXXXXXXXX
SSID:TP-LINK_XXXX
SSID:TP-LINK_XXXX_5G
Model:Archer CR700 ver:1.0
S/N:XXXXXXXXXXXXX
Serial Number
MAC Address
SSID
Wi-Fi Password/PIN
Internet
Coaxial cablePower adapter