Archer CR700 AC1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router REV 1.0.
COPYRIGHT & TRADEMARKS is a registered trademark Specifications are subject to change without notice. of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2017 TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement.
減少電磁波影響,請妥適使用。 安全諮詢及注意事項 ●請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 ●清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 ●注意防潮,請勿將水或其他液體潑灑到本產品上。 ●插槽與開口供通風使用,以確保本產品的操作可靠並防止過熱,請勿堵塞或覆蓋開口。 ●請勿將本產品置放於靠近熱源的地方。除非有正常的通風,否則不可放在密閉位置中。 ●請不要私自打開機殼,不要嘗試自行維修本產品,請由授權的專業人士進行此項工作。 Safety Information When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source.
CONTENTS Package Contents .................................................................................................... 1 Chapter 1. Product Overview ................................................................................... 2 1.1 Overview of the Modem Router..................................................................................... 2 1.2 Main Features ............................................................................................................... 2 1.
5.3.4 Dynamic DNS..................................................................................................................... 35 5.3.5 Advanced Routing .............................................................................................................. 36 5.4 Wireless 2.4G ............................................................................................................. 37 5.4.1 Basic Settings ....................................................................................
5.10.3 Connection Status ............................................................................................................ 82 5.10.4 Diagnostic ......................................................................................................................... 84 5.10.5 Time Settings .................................................................................................................... 86 5.10.6 Backup & Restore ...................................................................
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Package Contents The following contents should be found in your package: One Archer CR700 AC1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router One Power Adapter for Archer CR700 AC1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router Quick Installation Guide One RJ45 cable Note: Make sure that the package contains the above items.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Chapter 1. Product Overview Thank you for choosing the Archer CR700 AC1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router. 1.1 Overview of the Modem Router The Archer CR700 AC1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router integrates DOCSIS 3.0 modem, NAT router, 4-port switch and wireless access point in one device provides a one-stop networking solution. The modem router provides up to 450Mbps (2.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Guest Network Access provides secure Wi-Fi access for guests sharing your home or office network IPv6 supported, meeting the demands for the next generation of Internet Wi-Fi On/Off Button allows users to turn their wireless radio on or off Easy one-touch WPA wireless security encryption with the WPS button WPA-PSK/WPA2-PSK encryptions provide user networks with active defense against security threats Parent
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide 1.3 Panel Layout 1.3.1 The Front Panel Figure 1-1 The modem router’s LEDs are located on the side panel (View from top to bottom). They indicate the device’s working status. For details, please refer to LED Explanation. LED Explanation: Name (Power) Status Indication On Power is on. Off Power is off.
Archer CR700 (Downstream) AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Green The modem router is synchronized with more than one channel. White The modem router is synchronized with one channel. Flashing Off (Upstream) (Internet) (LAN) (Wireless) (USB on the back panel) The initialization is not started, or has failed. Green The modem router is synchronized with more than one channel. White The modem router is synchronized with one channel.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide 1.3.2 The Back Panel Figure 1-2 RESET: There are two ways to reset the modem router's factory defaults. Method one: With the modem router powered on, use a pin to press and hold the Reset button for at least 8-10 seconds. And the modem router will reboot to its factory default settings. Method two: Restore the default setting from “5.10.6 Backup & Restore” of the modem router's Web-based Management.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Chapter 2. Install the Modem Router 2.1 System Requirements Broadband Internet Access Service (Cable). PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors. TCP/IP protocol on each PC. Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari. 2.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Step 2: Wait for about 1 minute until the following LEDs are solid on. Step 3: Connect your computer to the modem router via a wired or wireless connection. Wired: Connect the computer to the modem router’s LAN port via an Ethernet cable. Wireless: On your computer, select and connect to the modem router’s wireless network.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Note: If the Internet is not accessible, contact your Internet service provider and make sure that the modem router is activated. Safety Information The product should be connected to cable distribution system that grounded (earthed) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93 - Grounding of Outer Conductive Shield of a Coaxial Cable.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Chapter 3. Log into the Modem Router With a Web-based management page, it is easy to configure and manage the Archer CR700 AC1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router. The Web-based management page can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari. Set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Chapter 4. Basic 4.1 Network Map Network Map provides a dashboard that lets you see the status of your Internet connection and network at a glance. You can click any of the eight sections of the dashboard to view the detail information. All the information is read-only. Figure 4-1 Internet - View Check the ISP settings of your modem router. Router - View Check the Wireless and Guest Network settings.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 4-2 1) Dynamic IP Choose Dynamic IP in the drop-down list, the modem router will be able to obtain IP network information dynamically from a DHCP server provided by your ISP. Figure 4-3 Click the Apply button to save the settings. 2) Static IP Choose Static IP in the drop-down list if your ISP provides static IP information to you. You should set static IP address, Subnet mask, and gateway address in the screen below.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Primary DNS/ Secondary DNS - Here you can set DNS Server (at least one) manually. The Route will use this DNS Server for priority. Click the Apply button to save the settings. 3) L2TP(Dynamic IP) Choose L2TP (Dynamic IP) in the drop-down list if your ISP provides L2TP (Dynamic IP) information to you. You should set User name, Password and Server IP Address/Name in the screen below.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 4-6 User name/Password - Enter the User name and Password provided by your ISP. These fields are case-sensitive. If you have difficulty with this process, please contact your ISP. Server IP Address/Name - Enter the server IP address or domain name provided by your ISP. If you have difficulty with this process, please contact your ISP.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 4-7 Enable Wireless Radio – Check the box to enable the Wireless Radio. Name (SSID) – Create a name (up to 32 characters) for your 2.4GHz/5GHz wireless network. The default SSID is set to be TP-LINK_XXXX for the wireless network of 2.4GHz and TP-LINK_XXXX _5G for the wireless network of 5GHz. Hide SSID – If you want to hide the SSID of your wireless network from the Wi-Fi network, you should check the box.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 4-8 2.4GHz - If Enable Wireless Radio is selected, please complete the following parameters. Figure 4-9 Name (SSID) - Create a name for the guest network. When setting up a Guest network, it is strongly recommended to use a name that easily distinguishes it from your primary network. The default name is TP-LINK_Guest_2.4GHz. If you want to hide the guest network from the Wi-Fi network, check the Hide SSID.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide 5GHz - If Enable Wireless Radio is selected, please complete the following parameters. Figure 4-10 Name (SSID) - Create a name for the guest network. When setting up a Guest network, it is strongly recommended to use a name that easily distinguishes it from your primary network. The default name is TP-LINK_Guest_XXXX_5G. If you want to hide the guest network from the Wi-Fi network, check the Hide SSID.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 4-11 Disk Settings: Scan - Click the button to display the information of the USB storage device connected to the modem router. Volume - The volume name of the USB drive the users have access to. Capacity - The storage capacity of the USB driver. Free Space - The available capacity of the USB driver.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Note: Before removing the USB storage device, you should click “ Safely Remove” to make sure that all your data have been saved completely. Removing device directly may cause your USB storage device crashed. Sharing Settings: Network/Media Server Name - Show the name of the network/media server. This is the name used to access the USB device connected to the modem router.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide 3. Select the volume desired to share from the Volume drop-down list. Then click the Browse button to select the folder path. You can create a share name, e.g. music. 4. Select the checkboxes in Figure 4-13.according to your needs. Enable Authentication - If this checkbox is selected, then the folder sharing is need authentication.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 4-15 Parental Control: Enable Parental Control - The switch for the parental control. If turn on the switch, the field will become green. Devices Under Parental Control: Add - You can add a new device for the parental control by clicking this button. Delete - You can click the button to delete the selected entries. Device Name -The name used for identifying a device.
Archer CR700 Modify – Click the you can click the AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide icon to edit the corresponding entry. If you want to delete this entry, icon. To add a new entry, please follow the steps below. 1. Click the Add button and the next screen will pop-up. Figure 4-16 2. Click View Device button and the next screen will pop-up. You’d like to click the select a device. icon to Figure 4-17 3. to create a new schedule.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide White List Mode - Only the web entered within the White List will be allowed. Check the box Add a new keyword button and input the net to enable this mode. You’d like to click addresses which the child is allowed to access. Click Save to complete the settings.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Chapter 5. Advanced 5.1 Status Choose menu “Advanced→Status”, you can see the current status information about the modem router. Figure 5-1 5.2 Operation Mode Choose menu “Advanced→Operation Mode”, and you will see the screen as shown in Figure 5-2.Select your desired mode and then click Save.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Router Mode - The device enables multi-users to share Internet via cable using its Cable port and share it wirelessly at 450Mbps wireless speeds over the crystal clear 5GHz band and 1300Mbps over the 2.4GHz band. Bridge Mode – In this mode, the modem router can be configured to act as a bridging device between your LAN and your ISP.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-4 Connection Status: Connection Type – Display the connection type for WAN. IP/MAC Address - This field displays the current IP/MAC address of the Internet port. Duration – Display the total connection time. Expires – Display the expiration time of the DHCP servers leases an IP address to a new device. DisConnect - Click the DisConnect button to release WAN lease, then the Note Dialog will appear.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide ReConnect –Click the ReConnect button to renew WAN lease, then the Note Dialog will appear. You can click the OK button to disconnect immediately. Connection settings: There are four different connection types, Dynamic IP, Static IP, L2TP(Dynamic IP) and L2TP(Static). You can select the corresponding type according to your needs.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-6 Current used MAC Address - This field displays the current MAC address of the Internet port. MAC Clone - You can select one of below methods to change MAC address for this WAN Interface depend on your needs. If you select Use this MAC Address, you can enter the MAC Address you want to change. Click the Apply button to save the settings.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-7 IP Address - Enter the IP address in dotted-decimal notation provided by your ISP. Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP, usually is 255.255.255.0. Default Gateway - Enter the gateway IP address in dotted-decimal notation provided by your ISP. Primary DNS/ Secondary DNS - Here you can set DNS Server (at least one) manually.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-8 User name/Password - Enter the User name and Password provided by your ISP. These fields are case-sensitive. If you have difficulty with this process, please contact your ISP. Server IP Address/Name - Enter the server IP address or domain name provided by your ISP. If you have difficulty with this process, please contact your ISP.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-9 User name/Password - Enter the User name and Password provided by your ISP. These fields are case-sensitive. If you have difficulty with this process, please contact your ISP. Server IP Address/Name - Enter the server IP address or domain name provided by your ISP. If you have difficulty with this process, please contact your ISP.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide 5.3.2 LAN Settings Choose “AdvancedNetworkLAN Settings” menu, and you will see the LAN screen shown below. Please configure the parameters for LAN ports according to the descriptions below. Figure 5-10 LAN Settings: IP Address - Enter the modem router’s local IP Address, then you can access to the Web-based management page via the IP Address, the default value is 192.168.1.1.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide DHCP Sever – Check the box to enable this function. If DHCP Server is enabled, the modem router will work as a DHCP server, which provides the TCP/IP configuration for all the PC(s) that are connected to it on the LAN. MAC Address - The MAC address of the DHCP client Start IP Address - Enter a value for the DHCP server to start with when issuing IP addresses.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-11 IPv6 LAN Settings: IPv6 Address - Display the modem router’s local IPv6 Address. IPv6 Prefix – Display the IPv6 prefix address. System Delegated Prefix – Display the prefix address used for the tunnel. DHCPv6 Server Settings: DHCPv6 Server – Check the box to enable DHCPv6 server. LAN Delegated Prefix – Display the LAN prefix address.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Valid Lifetime - The Valid Lifetime is the amount of time in which a network user will be allowed connection to the modem router with their current dynamic IP address. Enter the amount of time, in seconds, then the user will be assigned this dynamic IP address. After the dynamic IP address has expired, the user will be automatically assigned a new dynamic IP address. The default is 3600 seconds.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Host Name - Enter the Domain name you want to set. IP Address – Display the WAN IP address. Click the Save button to save your settings. 5.3.5 Advanced Routing Choose “Advanced Network Advanced Routing”, you can view all the current groups on this page. Figure 5-13 RIP Authentication – Check the box to enable the RIP Authentication function.
Archer CR700 5.4 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Wireless 2.4G Choose menu “Advanced→Wireless 2.4G”, you will see six submenus under the Wireless menu: Basic Settings, Primary Network, Guest Network, MAC Filtering, Wireless Bridging and Wireless Advanced. Click any of them, and you will be able to configure the corresponding function. 5.4.1 Basic Settings Choose menu “Advanced → Wireless 2.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Mode – Select the desired mode. 11bgn mixed: Select if you are using a mix of 802.11b, 11g, and 11n wireless clients. 11gn mixed: Select if you are using both 802.11g and 802.11n wireless clients. 11n only: Select if you are using 802.11n wireless clients only. Select the desired wireless mode. It is strongly recommended that you set the Mode to 11bgn mixed, and all of 802.11b, 802.11g, and 802.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-15 2.4GHz Primary Network: Name (SSID) – Create a name (up to 32 characters) for your 2.4GHz wireless network. The default SSID is set to be TP-LINK_XXXX. Hide SSID – If you want to hide the SSID of your wireless network from the Wi-Fi network, you should check the box.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Encryption – You can choose the encryption by selecting Auto, TKIP or AES. The default setting is AES. Wireless Password – You can enter ASCII characters between 8 and 63 characters or 8 to 64 Hexadecimal characters. The default password is the same with the default PIN code, which is labeled on the bottom of the modem router.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide WPS Wizard: Enable WPS - The switch for the WPS. If you turn on this button, the field will become green and you can add a new wireless device to an existing network quickly by WPS (also called QSS) function. Select a setup method – You can select either of Push Button (Recommended) or PIN Number as the WPS setup method.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-17 Step 2: Press and hold the WPS button of the client device directly. Step 3: The WPS LED flashes for two minutes during the Wi-Fi Protected Setup process. Step 4: When the WPS LED is on, the client device has successfully connected to the modem router. Refer back to your client device or its documentation for further instructions. II.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-19 Settings: See each other - If Allow guests to see each other is selected, anyone who connects to the guest network can access each other. Access my local network - If Allow guests to access my local network is selected, anyone who connects to the guest network has access to your local network, not just Internet access. Wireless: Wireless radio – Check the box to enable this function.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Click Save button to save the settings. 5.4.4 MAC Filtering Choose menu “Advanced → Wireless 2.4GHz → MAC Filtering”, you can control the wireless access by configuring the MAC Filtering function. Figure 5-20 2.4GHz Access Control: Wireless Interface - Select an available wireless interface from the drop-down list. Enable MAC Filtering- The switch for the MAC Filtering.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide MAC Address - This field displays the MAC address of the wireless station that cannot access this router/can access this router. Modify - Click the icon to delete this entry. To add a MAC Address Filtering entry: 1. Click 2. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 00-1D-0F-11-22-33.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-22 Wireless Stations Online: MAC Address - The MAC address of the wireless station online. Age(s) – Display the duration time of wireless station online. RSSI(dBm) – Refers to the Received Signal Strength Indication. IP Address- The IP address of the wireless station online. Host Name – Display the host name of the wireless station. 5.4.5 Wireless Bridging Choose menu “Advanced → Wireless 2.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide 5.4.6 Wireless Advanced Choose menu “Advanced → Wireless 2.4G → Wireless Advanced”, you can configure the advanced settings of your wireless network. Figure 5-24 2.4GHz Advanced: Beacon Interval - Enter a value between 25-1000 milliseconds for Beacon Interval here. The beacons are the packets sent by the modem router to synchronize a wireless network. Beacon Interval value determines the time interval of the beacons.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide antennas are dormant, so as to achieve the purpose of saving power. Click the Save button to save the settings. 5.5 Wireless 5G Choose menu “Advanced→Wireless 5G”, you will see six submenus under the Wireless menu: Basic Settings, Primary Network, Guest Network, MAC Filtering, Wireless Bridging and Wireless Advanced. Click any of them, and you will be able to configure the corresponding function. 5.5.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-25 Wireless Radio – Check the box to enable the Wireless Radio. Power – Here you can specify the transmit power of the modem router. You can select 25%, 50%, 75% and 100% which you would like. 100% is the default setting and is recommended. Mode – Select the desired mode. 11a/n/ac mixed: Select if you are using a mix of 802.11a, 11n and 11ac wireless clients. 11ac/n mixed: Select if you are using a mix of 802.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-26 2.4GHz Primary Network: Wireless Radio – Check the box to enable the Wireless Radio. Name (SSID) – Create a name (up to 32 characters) for your 5GHz wireless network. The default SSID is set to be TP-LINK_XXXX _5GHz. Hide SSID – If you want to hide the SSID of your wireless network from the Wi-Fi network, you should check the box.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide 6) WPA-PSK/WPA2-PSK Personal(Recommended): Version –You can choose the version of the WPA-PSK/WPA2-PSK security by selecting Auto, WPA-PSK or WPA2-PSK. The default setting is WPA2-PSK. Encryption – You can choose the encryption by selecting Auto, TKIP or AES. The default setting is AES. Wireless Password – You can enter ASCII characters between 8 and 63 characters or 8 to 64 Hexadecimal characters.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Note: You cannot connect other device to this modem router by entering the router’s PIN on your client device if you haven’t switch on Enable Router’s PIN. WPS Wizard: Enable WPS - The switch for the WPS. If you turn on this button, the field will become green and you can add a new wireless device to an existing network quickly by WPS (also called QSS) function.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-27 Figure 5-28 Step 6: Press and hold the WPS button of the client device directly. Step 7: The WPS LED flashes for two minutes during the Wi-Fi Protected Setup process. Step 8: When the WPS LED is on, the client device has successfully connected to the modem router. Refer back to your client device or its documentation for further instructions. IV.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-29 Step 4: “Device has been added successfully!” will appear on the screen, which means the client device has successfully connected to the modem router. Note: 1) The WPS LED on the modem router will light green for five minutes if the device has been successfully added to the network. 2) The WPS function cannot be configured if the Enable Router’s PIN switch is off.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-30 Settings: See each other - If Allow guests to see each other is selected, anyone who connects to the guest network can access each other. Access my local network - If Allow guests to access my local network is selected, anyone who connects to the guest network has access to your local network, not just Internet access. Wireless: Wireless radio – Check the box to enable this function.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide 5.5.4 MAC Filtering Choose menu “Advanced → Wireless 5GHz → MAC Filtering”, you can control the wireless access by configuring the MAC Filtering function. Figure 5-31 5GHz Access Control: Wireless Interface - Select an available wireless interface from the drop-down list. Enable MAC Filtering- The switch for the MAC Filtering.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Modify - Click the icon to delete this entry. To add a MAC Address Filtering entry: Add button, then you will see a setting page. 1. Click 2. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 00-1D-0F-11-22-33. Figure 5-32 3. Click the OK button to save this entry.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-33 Wireless Stations Online: MAC Address - The MAC address of the wireless station online. Age(s) – Display the duration time of wireless station online. RSSI(dBm) – Refers to the Received Signal Strength Indication. IP Address- The IP address of the wireless station online. Host Name – Display the host name of the wireless station. 5.5.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide WDS Bridging - With this function, the modem router can bridge more WLANs. If you check the Enable WDS, you can click the Scan AP button to scan the nearby wireless access points. Remote Bridges – Enter the MAC address of the access point which you choose to be bridged. Click the Save button to save the settings. 5.5.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Short GI - This function is recommended for it will increase the data capacity by reducing the guard interval time. Short GI is enabled by default. Enable WMM – Check the box to enable this function. WMM function can guarantee the packets with high-priority messages being transmitted preferentially, which is strongly recommended. It is enabled by default. Enable Power Save Support - Check the box to enable this function.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-37 IP Filtering: Start/End IP Address –Display the start IP Address/end IP Address of the client that cannot access this router. Enable - Click the will become icon to enable the function. If this function has taken effect, the icon . Modify - Click the you can click the icon to edit the corresponding entry. If you want to delete this entry, icon.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide 5.6.2 MAC Filtering Choose menu “Advanced NAT Forwarding MAC Filtering”, and then then you can control the client’s access by configuring the MAC Filtering function. Figure 5-39 MAC Filtering: MAC Address - This field displays the MAC address of the station that cannot access this router. Modify - Click the you can click the icon to edit the corresponding entry. If you want to delete this entry, icon.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide 5.6.3 Port Filtering Choose menu “Advanced NAT Forwarding Port Filtering”, and then you can control the client’s access by configuring the Port Filtering function. Figure 5-41 Port Filtering: Add - You can add a new device for the Port Filtering rule by clicking Delete - You can click Start/End Port - Display the start port/end port that cannot access this router.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-42 5. Click the OK button to save this entry. If you do not want to save this entry, click the Cancel button. 5.6.4 Port Forwarding Choose menu “Advanced NAT Forwarding Port Forwarding”, and then you will see the screen as shown below. Service Name - The port forwarding you want to use. External Port - The numbers of External Service Ports. You can enter a service port (the value between 1-65535).
Archer CR700 Enable – Click the will become AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide icon to enable the function. If this function has taken effect, the icon . Modify – Click the you can click the icon to edit the corresponding entry. If you want to delete this entry, icon. To setup a port forwarding entry: Add button. 1. Click the 2. Enter the Service Name. 3. Enter the external port of the computer running the service application in the External Port field. 4.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Internet games, video conferencing, Internet telephoning and so on. Port Triggering is used for some of these applications that cannot work with a pure NAT modem router. Figure 5-44 Triggering Start/End Port - The start port/end port for outgoing traffic. An outgoing connection using this port will trigger this rule. External Start/End Port - The port used by the remote system when it responds to the outgoing request.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-45 Note: 1. When the trigger connection is released, the corresponding opened ports will be closed. 2. Each rule can only be used by one host on the LAN at a time. The trigger connection of other hosts on the LAN will be refused. 3. External Port ranges cannot overlap each other.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide 5.6.6 DMZ Choose menu “Advanced → NAT Forwarding → DMZ”, and then you can view and configure DMZ host in the screen shown below. The DMZ host feature allows one local host to be exposed to the Internet for a special-purpose service such as Internet gaming or videoconferencing. The router forwards packets of all services to the DMZ host.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-47 IPSec Passthrough - Internet Protocol security (IPSec) is a suite of protocols for ensuring private, secure communications over Internet Protocol (IP) networks, through the use of cryptographic security services. To allow IPSec tunnels to pass through the modem router, turn on the switch.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide SIP ALG Enable- To allow SIP clients and servers to transfer data across NAT, turn on the switch. Click Save button to save these settings. PassThrough MAC Address MAC Address –This field displays the MAC address which is allowed to pass through the modem router Modify – Delete this entry, you can click the icon. To add a new entry, please follow the steps below.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-49 Click the Scan button to scan the USB drive connected to the router. Volume - The volume name of the USB drive the users have access to. Capacity - The storage capacity of the USB driver. Free Space- The available space of the USB driver. Status: When the volume is shared, you can click the when volume is non-shared, you can click to Click icon to stop sharing the volume; icon share the volume.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-50 Sharing Account Account – You can select Use Default Account or Use Custom Account to log in sharing Folders.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Use Default Account - Select this radio button, and the sharing account username is admin, and password is the same as Login Password. Use Custom Account - Select this radio button, then you have to specify the new username and password in the Username and Password fields for sharing account. Click Save button to save these settings. Sharing Settings Network/Media Server Name - Show the name of the network/media server.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-51 2. Click the Add button and the next screen will pop-up as shown below. Figure 5-52 3. Select the volume desired to share from the Volume drop-down list. Then click the Browse button to select the folder path. You can create a share name, e.g. image. 4. Select the checkboxes in Figure 5-52.according to your needs.
Archer CR700 5.8 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Parental Control Choose menu “Advanced→Parental Control”, and then you can configure the parental control in the screen as shown below. The Parental Control function can be used to control the internet activities of the child, limit the child to access certain websites and restrict the time of surfing. Figure 5-53 Enable Parental Control - The switch for the parental control.
Archer CR700 Enable – Click the will become AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide icon to enable the function. If this function has taken effect, the icon . Modify – Click the you can click the icon to edit the corresponding entry. If you want to delete this entry, icon. To add a new entry, please follow the steps below. 4. Click the Add button and the next screen will pop-up as shown below. Figure 5-54 5.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Black List Mode - All webs entered within the Black List will be denied to access. Check the Add a new keyword button and input the net box to enable this mode. You’d like to click addresses which the child is denied to access. White List Mode - Only the web entered within the White List will be allowed. Check the box Add a new keyword button and input the net to enable this mode.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-57 Firewall: Firewall Protection - You can select Off, Low, Medium or High which you would like. Block Fragmented IP Packets - This feature helps protect your private local network from Internet based denial of service attacks. Check the box to enable this function.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-58 Contact Email Address – The modem router can email you its logs. Enter your email address here. SMTP Server Name - Enter the name of your SMTP sever. SMTP User Name/Password – The default User Name/Password is admin/admin. You can also specify the new username/password. Email Alerts – Check the box to enable this function. This feature can send alerts when someone attempts to visit a blocked site.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-59 Select the Log checkbox to view the corresponding events. Server Address - The specified IP address of the remote system log server. Click Save button to save these settings.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide 5.10 System Tools Choose menu “Advanced→System Tools”, you will see eight submenus under the System Tools menu: System Information, Device Information, Connection Status, Diagnostic, Time Settings, Backup & Restore, Administrator and Event Log. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 5.10.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide 5.10.2 Device Information Choose menu “Advanced→System Tools→Device Information”, you can see the current information about the modem router. Figure 5-61 5.10.3 Connection Status Choose menu “Advanced→System Tools→Connection Status”, you can see the current connection status about the modem router.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide 83
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-62 Startup Procedure - Display the initialization progress. Downstream/Upstream Bonded Channels - Display the status of each channel. Time Information –The time information will display when the modem router is initialized. 5.10.4 Diagnostic Choose menu “Advanced→System Tools→Diagnostic”, you can test the connectivity of the Internet on the following screen.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-63 Diagnostic tool - There are two tools to diagnose, which is PING and Traceroute. You can select the corresponding type according to your needs. 1) PING: If you select this option, you could check the status of the Internet connection. IP Address – Enter the IP address that you want to PING. PING Packet Size – Enter the size of the PING packet you want to use.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide IP Address/ Domain Name – Enter the IP Address or Domain Name you want to trace. Max Hops – Enter the max number of hops. Data Size – Enter the size of data you want to use. Base Port – Enter the port number to send packets. Resolve Host – To resolve the host name to the IP address you can select ON from the drop-down list. The default status is OFF. Click Start Test to check the connectivity of the Internet.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-64 Time Settings: Enable SNTP - The switch for SNTP function. If you turn on the switch, the field will become green. Current Time – Display the current time. System Start Time – Display the system start time. Time Server 1 / Time Server 2 / Time Server 3- Enter the address or domain of the Server 1 or Server 2, and then the modem router will get the time from the Server preferentially.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-65 Backup: Click the Backup button to save all configuration settings as a backup file in your local computer. Restore: To restore the modem router's configuration, follow these instructions. • Click the Browse button to find the configuration file which you want to restore. • Click the Restore button to restore the configuration with the file whose path is the one you have input or selected in the blank.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Figure 5-66 Account Management: Here you can set the account user information about Old Password, New Password and Confirm Password. It is strongly recommended that you should change the factory default password of the router, because all users who try to access the router's Web-based utility or Quick Setup will be prompted for the router's default username and password. Note: Enter the new Password twice to confirm it.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Note: To access the router, you should type your router's WAN IP address into your browser's address (in IE) or Location (in Navigator) box, followed by a colon and the custom port number. For example, if your router's WAN address is 202.96.12.8, and the port number used is 8080, please enter http://202.96.12.8:8080 in your browser. Later, you may be asked for the router's password.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Appendix A: Specifications HARDWARE FEATURES 1 F-Connector, female 75 Ω Interface 4 10/100/1000Mbps RJ45 LAN Ports 2 USB 2.0 Ports 1 Power Jack 1 Power On/Off Button Button 1 Wi-Fi On/Off Button 1 WPS Button 1 Reset Button External Power Supply 12VDC/3.3A IEEE Standards IEEE 802.3/3u/3ab, IEEE 802.11a/b/g/n/ac DOCSIS 3.0 DOCSIS Standards DOCSIS 2.0 DOCSIS 1.1 DOCSIS 1.0 Dimensions ( W x D x H ) 2.5 x 7.6 x 9.7 in.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide HARDWARE FEATURES Bandwidth DOCSIS Frequency Range 108 to 1002 MHz (edge to edge) Frequency Plan DOCSIS Annex B Symbol Rate DOCSIS 64 QAM 5.057 Msym/s; 256 QAM 5.361 Msym/s Operating Level Range –15 to 15 dBmV (DOCSIS) Security DOCSIS 3.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide WIRELESS FEATURES Wireless Standards Wireless Speeds IEEE 802.11ac/n/a 5GHz IEEE 802.11b/g/n 2.4GHz 5GHz: Up to 1300Mbps 2.4GHz: Up to 450Mbps Frequency 2.4GHz and 5GHz EIRP <20dBm(EIRP) Wireless Functions Enable/Disable Wireless Radio, WDS Bridge, WMM, Wireless Statistics Wireless Security Guest Network WPS 64/128-bit WEP,WPA / WPA2,WPA-PSK/ WPA2-PSK encryption, Wireless MAC Filtering 2.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide SOFTWARE FEATURES Remote management, SSL for TR-069; Diagnostic Tools Parental Control, Network Address Translation (NAT); Advanced Features RIP v1/v2(optional); DNS, DNS Proxy, IGMP V1/V2/V3, UPnP OTHERS Certification FCC, RoHS, CableLabs, UL Archer CR700 Package Contents RJ-45 Ethernet Cable Quick Installation Guide Power Adapter System Requirements Microsoft® Windows® 98SE, NT, 2000, XP, Vista™, Windows 7, Windows 8, MAC
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Appendix B: Troubleshooting T1. How do I restore the modem router to its factory default settings? 1) With the modem router powered on, press and hold the Reset button on the rear panel of the modem router until all LEDs turn back on, then release the button. 2) Log in to the web management page of the modem router. Go to Advanced > System tools > Back up & Restore and click Reset.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide For Windows XP Click “Start -> Control Panel -> Network and Internet Connections -> Network Connections”. Right-click Wireless Network Connection (or Local Area Connection), and then click Properties. Select Internet Protocol (TCP/IP), and then click Properties. Select Obtain an IP address automatically and Obtain DNS server address automatically. Then click OK.
Archer CR700 AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide Select Never dial a connection Click OK Now, try to log on to the Web-based management page again after the above settings have been configured. If you still cannot access the configuration page, please restore your modem router’s factory default settings and reconfigure your modem router following the instructions in 3 Configure the Modem Router. Please feel free to contact our Technical Support if the problem still exists. T4.