user manual

TL-WA830RE
300Mbps Wireless N Range Extender User Guide
23
Figure 4-12 Wireless Settings in Range Extender mode 2
 Operation Mode - Three Operation Modes are supported, including: Access Point, Range
Extender mode 2 and Range Extender mode 1.
 Survey - Click this button, you can search the AP which runs in the current channel.
 Wireless Name of Remote AP - The SSID of the AP your device is going to connect to as a
client. You can also use the search function to select the SSID to join.
 MAC Address of Remote AP - The BSSID of the AP your device is going to connect to as a
client. You can also use the search function to select the BSSID to join.
 Region - Select your region from the drop-down list. This field specifies the region where the
wireless function of this device can be used. It may be illegal to use the wireless function of
this device in a region while you chose a different region in the drop-down list. If your country
or region is not listed, please contact your local government agency for assistance.

Note:
The default region is United Kingdom. When you select your local region from the pull-down
list, the dialog shown in Figure appears below. Click OK.
Note Dialog

Note:
Restricted by local law regulations, version for North America does not have region selection
option.