Deco X50 Superior Mesh Wi-Fi, Everywhere User Guide AX3000 Whole Home Mesh Wi-Fi 6 System 1910013077 REV1.0.
Contents About This Guide····················································· 1 Shortcut······································································22 Appearance································································ 2 Automation································································24 Dashboard··································································· 6 Wi-Fi Settings··························································29 Set Up Your Deco···················
About This Guide This guide provides a brief introduction to Whole Home Deco Mesh Wi-Fi 6 System and the Deco app, as well as regulatory information. Features available in Deco may vary by model and software version. Deco availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Deco experience.
Appearance Each Deco has an LED that changes color according to its status, three RJ-45 Ethernet ports, a power slot, and a Reset button. See the explanation below: Tip: The product label can be found at the bottom of the product. Pulse Yellow: Deco is resetting. Solid Yellow: Deco is starting up. Pulse Blue: Deco is ready for setup. Solid Blue: Deco is setting up. Pulse Green: Deco is upgrading firmware. Solid Green: Deco is all set up and connected.
Set Up Your Deco The intuitive Deco app guides you through an easy setup process that gets each unit up and all your devices connected. Follow the steps below to set up your Whole Home Deco Mesh Wi-Fi 6 System. 1. Download and install the Deco app Scan the QR code below or go to Google Play or the App Store to download the Deco app. Install the app on your Android or iOS smartphone or tablet. 2. Log in or sign up with TP-Link ID Open the app. Use your TP-Link ID to log in.
4. Plug in and power on Deco Power off your modem. Connect your Deco to the modem and power them both on. If you don't have a modem, connect the Ethernet outlet directly to your Deco. 5. Select a location Select a location for this Deco. If its location is not listed, you can create a new one by choosing Custom. This will be the name of your Deco. 6. Set up internet connection Select the internet connection type and enter the information. If you are not sure, contact your internet service provider.
. Create your Wi-Fi network Set a network name and a password. These will be the name and password you use to connect your devices to Wi-Fi. 8. Connect to your Wi-Fi network Connect your phone/tablet to the Deco's Wi-Fi. 9. Setup complete Your Deco network is now up. Connect all devices to the Deco network. You can also Add More Decos to expand the Wi-Fi coverage.
Dashboard After you successfully set up your Deco network, you will see the dashboard of the Deco app. Here you can get an overview of the network status, create shortcut and automation, customize your home network with enhanced security using a kit of features built to TP-Link HomeShield and set up various advanced features. Tap to get an overview of the network status. Tap to create shortcut or automation. Tap to enter the HomeShield page for enhanced security. Tap for more features.
Add More Decos After creating a Deco network, you can add more Decos to the network to expand the Wi-Fi coverage and manage them easily on your Deco app. 1. In Overview, tap + > DECOS. 2. Select the Deco model you want to add, and follow app instructions to complete the setup.
Check Deco Status In Overview, you can check the working status (online/offline) of all the Decos, check the details (speed/Deco's IP address & MAC address/connected clients) of each Deco, change the Deco's location/name, and more. Tap to check all Decos' status. Tap a Deco unit to check more details. Check download/upload speed of the Deco.
Change or customize the location/name of the Deco. Check the clients connected to the Deco. Enable the Mesh feature, then the client can seamlessly switch to the Deco that provides the fastest speed as you move around.
Set Main Deco After setup, you can replace the main Deco with any satellite Deco without resetting or reconfiguring the whole network. Follow the steps below to complete the setup process. Note: The main Deco links all the others to the internet. After the main Deco finishes switching, you need to connect the new main Deco to the modem or Ethernet outlet for internet connection. For DSL Deco, connect it to the phone jack or DSL splitter. For 4G/5G Deco, insert a nano SIM card to it. 1.
Remove/Reboot Deco You can reset your Deco to factory default settings or reboot your Deco to clear cache and enhance running performance easily in the Deco app. Follow the steps below. Note: Rebooting your Deco will keep the current settings on it. Removing your Deco will reset it to factory default settings and you will need to set up your Deco again. You can also press the Reset button on the Deco for 1 second to quickly reset your Deco to factory default settings. 1. In Overview, tap . 2.
Manage Connected Devices In Overview, you can mange your connected devices easily, such as changing the device name/type/location, enabling automation, Mesh Technology and high priority for the device, setting a profile to manage its online activities, and more. Tap a connected device to check the details (e.g. real-time upload and download speeds, device name/location/profile, etc.). Change the device name as needed.
Tap Automation to enable, disable, or edit it. If you have not set automation yet, follow Automation to create one. Enable High Priority and set the Duration time to prioritize the connection of this device during the time, such as a family member’s laptop for one hour during a video call.
Tap to manage the device settings, including changing the device name/type, viewing device detailed information (IP address, MAC address, connected network, linked Deco, etc.), and more. Tap Location to sort the devices by customized locations so that you can quickly find and manage the devices.
Tap Belongs to to add a unique profile for the device and manage its online activities. For example, when and for how long this device can access the internet, block inappropriate content, and pause the internet if necessary. For more information about the feature, refer to HomeShield. Enable Mesh Technology and then the device can seamlessly switch to the Deco that provides the fastest speed as you move around.
Sort Devices By Locations After adding your devices to the Deco network, you can sort them by customized locations so that it will be more convenient and efficient to manage your devices. For example, you can add the lights and computer in your bed room to a location set as "Bed Room", so you can quickly find and manage these devices. In Overview, tap + > LOCATIONS. Follow app instructions to sort your devices by location.
Create a New Network In the Deco app, you can create different Deco networks with your TP-Link ID and manage them conveniently from the Deco app with one account. You can also help family or friends manage their networks with your Deco app. Two methods are provided as below to create a new network. Method 1. Create a new network from the Overview page Tap > Create New Network. Then follow app instructions to complete the setup.
Method 2. Create a new network from the Menu page 1. Tap to open the menu. 2. Tap > CREATE NEW NETWORK. 3. Follow app instructions to complete the setup.
Change Network Owner You can change the network owner on the Deco app without resetting the whole Deco network. Follow the steps below.. In Overview, tap > > Change Network Owner. Follow app instructions to change the network owner. Then you will not be able to manage this network with your account anymore. The new owner needs to follow steps in an email sent from TP-Link to log in and manage the network.
Delete a Network You can delete a Deco network if you don't need it anymore. Deleting a Deco network will reset all Decos in this network to factory default settings. 1. In Overview, tap . 2. Tap > Delete.
Add Smart Devices After creating a Deco network, you can add your smart home devices to the network and manage them conveniently on your Deco app. In Overview, tap + > SMART DEVICES. Follow app instructions to add your smart devices to the network. Then the smart devices will display on the Overview page as shown below.
Shortcut Shortcut lets you achieve an action with a simple tap. For example, if you want to power on your living room light at one tap, follow the steps below. Note: If you want to create shortcuts for your smart devices, follow Add Smart Devices to add the smart devices to the Deco network first. 1. Tap > Shortcut > CREATE. 2. Add an action. 3. Choose an action type. 4. Choose the action device.
5. Set how the action behaves when executed. For example, set as below then the living room light will turn on 1 minute after you tap the shortcut icon and will turn off automatically after 2.5 hours. 6. Select an icon and set a name for the shortcut to finish the settings. 7. Tap the icon to execute the action. Tip: If you have set Delay Action, you will need to wait for the time you set before the action takes effect.
Automation Automation allows you to set interactions between your devices by adding triggers and actions. For example, when you get home and your smartphone is connected to the Deco network (which is a trigger), the living room plug automatically turns on (which is an action). Then the kettle plugged into the living room plug will start to boil water. Take this example to show the setup steps as below. Follow the steps to create an automation.
5. Select the trigger device and set the trigger details. 6. Add an action.
7. Select the action device and set the action details. For example, set the action as below then the living room plug will turn on after you tap the shortcut icon, and will turn off automatically after 1.5 hours. Tip: If you have set Delay Action, you will need to wait for the time you set before the action takes effect.
8. Set a name for the automation. 9. Automation setup completed. The automation will take effect when the trigger is executed.
HomeShield Whether protecting your network from malicious attacks, managing your family's online activities, or prioritizing devices to get better performance, TP-Link HomeShield provides you a kit of basic (free) and Pro (charged) features to customize your whole home network with enhanced security. An overview of HomeShield features is shown below. • What is HomeShield: tp-link.com/homeshield • How to use HomeShield features and upgrade to HomeShield Pro: go to the product support page at https://www.
Wi-Fi Settings You can change the network name and password of your main network at any time and share the network easily with family and friends. Tap > Wi-Fi. Manage main network (e.g. change your main network's Wi-Fi name and password, hide the network from Wi-Fi list, etc.). Share your network with others.
Set channel width for 5GHz Wi-Fi. 160MHz provides better Wi-Fi performance.
Guest Network You can create and share a separate network for guests to guarantee the security and privacy of your main network. Tap > Wi-Fi and enable Guest Network. Set a Wi-Fi name and password for the guest network. Share your guest network with others.
Network Optimization Network Optimization lets your Deco intelligently scan for a clearer channel and switch your devices to it, ensuring optimal Wi-Fi performance. Tap > Network Optimization. The app will scan the network automatically. Optimize your network for optimal Wi-Fi performance. Enjoy your time if your network status is perfect.
Blacklist Add devices to the blacklist to prevent the devices from accessing your network, ensuring the safety of your personal information shared in the network. Tap > Blacklist. Tap + and add clients or other devices to the blacklist. Remove devices/clients from blacklist.
Upgrade Your Deco TP-Link is dedicated to improving product features and providing a better customer experience. An up-to-date firmware provides better and more stable network performance. Always update your Deco to the latest firmware version when prompted in the Deco app. 1. Tap > Update Deco 2. Download and install the firmware (if any) and follow app instructions to update your Deco to the latest version.
Advanced Features Additional features are available under the Advanced menu.
Modify LAN IP to avoid IP address confict. Change DHCP server settings. Enable IPTV/VLAN mode to support Enable MAC Clone if Deco fails to IPTV services. connect to the internet. Tip: For more about MAC Clone, refer to https://www.tp-link.
Reserve IP addresses for specific devices to recognize and manage the device more easily. Set up port forwarding rules to enable devices in your network accessible over the internet with safety. Register a TP-Link DDNS domain name to access your router and local servers using a domain name. Enable SIP ALG to communicate with SIP (Session Initiation Protocol) servers via NAT).
Enable UPNP to allow your local network to dynamically open ports for applications like gaming. Enable Fast Roaming to allow your wireless devices to switch connection to different Decos. Enable Beamforming to concentrate Toggle off LED to turn off the light on Wi-Fi signal towards connected Deco. Configure the Night Mode to devices for stronger connections. turn off the LED light at bedtime only.
Change the operation mode. Note: When the Deco works in Access Point mode, advanced features such as IPv4, Address Reservation, Port Forwarding, and DHCP server are not available. Set connection alerts to receive Set notifications to receive alerts in notifications once the clients the notification bar. connect to or disconnect from Deco.
WPS WPS (Wi-Fi Protected Setup) helps you to quickly and securely connect a client to the network with a tap without entering any password. 1. Tap > WPS. 2. Tap the WPS icon on Deco app and then on your client. 3. Your device has connected to the network successfully if shown as below.
Managers Add friends and family members to help manage your network. Each manager should have their own TP-Link ID. Note: Managers can not modify owner's account, add other accounts, or set manager privileges. Tap > Managers, and follow app instructions to add other TP-Link ID account as manager.
Set privileges for managers. Note: Privileges may vary slightly depending on the model, the current operation mode, and software version you have. Remove managers.
Control Your Deco with Alexa Alexa Integration allows you to control your Deco using Amazon’s Alexa voice service. You can control and customize your home network by giving simple voice commands to Alexa, such as enabling the Guest Network, turning off your Deco LEDs, and more. Follow the steps below to use Alexa voice commands to control your Deco network. Tip: To know more about how to set up Alexa Integration in Alexa app, refer to https://www.tp-link.com/support/faq/1571/.
Troubleshooting Solutions to common problems during setup or use are provided here for reference. Follow the steps and the provided link below to diagnose and solve problems you might experience with your Deco. If problems still exist, contact us: https://www.tp-link.com/support Q1. What should I do if I fail to configure the main Deco and get stuck on “We couldn't find Deco”? Refer to the guide https://www.tp-link.com/support/faq/2239/ or follow the video https://youtu.be/2HYuEYS9XJM Q2.
Authentication FCC Compliance Information Statement Product Name: AX3000 Whole Home Mesh Wi-Fi 6 System Model Number: Deco X50 Component Name I.T.E POWER SUPPLY Component Model T120150-2B4 Product FCC ID 2AXJ4X50 Responsible party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.
• Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Compliance Information Statement Product Name: I.T.E POWER SUPPLY Model Number: T120150-2B4 Responsible party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY(the maximum transmitted power) 2412MHz—2472MHz (20dBm) 5150MHz—5350MHz (23dBm) EU Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863.
UKCA Mark UK Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/ National restrictions Attention: This device may only be used indoors in Great Britain. UK Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s).
Caution: The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz.
前述合法通信，指依電信管理法規定作業之無線電通信。 低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 應避免影響附近雷達系統之操作。 安全諮詢及注意事項 • 請按照本產品注明的電源類型使用本產品。 • 注意防潮，請勿將水或其他液體潑灑到本產品上。 • • • • 清潔本產品之前請先切斷電源。請勿使用液體、噴霧清潔劑或濕布進行清潔。 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。 不要私自拆開機殼或自行維修，如產品有故障請與原廠或代理商聯繫。 限用物質含有情況標示聲明書 設備名稱： 型號（型式）： Equipment name: Type designation (Type) 單元 Restricted substances and its chemical symbols 六價鉻 鎘 多溴聯苯 AX3000 完整家庭Mesh Wi-Fi 6系統 Unit Deco X50 限用物質及其化學符號 鉛 Lead (Pb) PCB 外殼
備考1. 超出0.1 wt %” 及 “超出0.01 wt %” 系指限用物質之百分比含量超出百分比含量基準值。 Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 備考2.“○”系指該項限用物質之百分比含量未超出百分比含量基準值。 Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 備考3.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. Explanation of the symbols on the product label Symbol DC voltage Caution Operator’s manual Explanation Indoor use only RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE).
