Item Brochure

40
Features
Accessories
Product Specications
Standard Models
Furnish and install Heavy-Duty Forced Air wall heaters, where specied. The heaters
shall be constructed of a heavy 18 gauge steel housing with an extruded Aluminum
frame. The rough-in dimensions are 14 ⅛” Wide x 19 ½” High x 4” Deep. The units
shall be available in ratings from 750 to 4800 Watts at 240, 208, and 277 Volts. The
heaters shall have a low-speed 600 RPM, 4-pole motor which drives a vane axial blower
to deliver a quiet 175 CFM of down ow air. The heating element shall be of the sealed tubular type with large, parallel steel ns
for quick heat transfer. Unit shall have as a standard, a thermal overload cut-off for added safety, fan delay switch and built-in
tamper proof thermostat which shall be calibrated to provide a range of 0°F. to 110°F. and manual disconnect switch. Optional
accessories shall include a surface and semi-recess mounting adapter. All heaters shall be listed by ETL. The heating element
shall be supplied with a manufactures 1-year limited warranty.
• Disconnect switch.
• Automatic fan delay circuit.
• Automatic reset thermal limit.
• Powder coated 18 gauge steel grill
with extruded Aluminum front frame.
• Steel block n element.
• Vane axial fan blade: 600 RPM motor; 175 CFM
• Rough-in dimensions: 14 ⅛” Wide x 19 ½” High x 4” Deep
• Grill dimensions: 15
29
⁄32” Wide x 20
27
⁄32” High
• Built-In tamper proof thermostat.
• Made in U.S.A.
*Indicates 3-Phase model. All other models are 1-Phase.
WARNING: This product can expose you
to chemicals including nickel which is known
to the State of California to cause cancer,
and chromium, which is known to the State
of California to cause birth defects and/or
reproductive harm. For more information go
to www.P65Warnings.ca.gov.
!
3320 Series Commercial Fan Forced Wall Heater
MFG
CATALOG
NUMBER
MFG
MODEL
NUMBER
WATT S BTUs VOLTS AMPS
WT.
(LBS)
LIST
IN-BUILT SINGLE POLE TAMPERPROOF THERMOSTAT (0º - 110º TEMPERATURE RANGE)
FOR DOUBLE POLE THERMOSTAT REPLACE “T” IN MODEL NUMBER WITH “T2” -- Add $50
03820502
E3321TD-RP
750 2560
120
6.25
26
760
03819902
E3322TD-RP
1000 3413 8.3
03808802
E3323TD-RP
1500 5120 12.5
761
03809302
F3326TD-RP
4000 13800
208
19.2
774
03810202
F3327TD-RP
4800 16560 23
813
03809402
HF3323TD-RP
1500 / 1125 5120 / 3840
240 / 208
6.2 / 5.4
774
03809502
HF3324TD-RP
2000 / 1500 6284 / 5120 8.3 / 7.2 27
03809602
HF3325TD-RP
3000 / 2250 10350 / 7763 12.5 /10.8
2903809702
HF3326TD-RP
4000 / 3000 13800 / 10350 16.7/14.4
03810302
H3327TD-RP
4800 16560 240 20
805
03809802
G3323TD-RP
1500 5120
277
4.1 26
773
03809902
G3324TD-RP
2000 6284 7.2 27
03810002
G3325TD-RP
3000 10350 10.8
29
03810102
G3326TD-RP
4000 13800 14.4
03810402
G3327TD-RP
4800 16560 17.3
796
03980702
J3326TD-RP*
4000 13800
208
11.11
30
931
03980802
J3327TD-RP*
4800 16560 13.33
978
03980902
K3326TD-RP*
4000 13800
240
9.64
931
03981002
K3327TD-RP*
4800 16560 11.57
978
International Models
03964202
M3324TD-RPi
3360/1680 11468/5734
220
15.3/7.64
27
774
03964302
M3325TD-RPi
4032/2016 13761/6881 18.3/9.16
MFG
CATALOG
NUMBER
MFG
MODEL
NUMBER
DESCRIPTION TYPE
WT.
(LBS)
LIST
03778502 BOX 3310 Additional Rough-in Box
Field Installed
3
120
03784502 3320EX33 4” Surface Mounting Frame 1
110
03829302 3320EX16 2” semi recess extender 1
94
----- Sufx - HD 16 Gauge Steel Heavy Duty Grill Factory Installed 2
121