Product Manual

INSTALLATION
INSTRUCTIONS
INSTALLATION
INSTRUCTIONS
INSTALLATION INSTRUCTIONS
BLANK SECTION
MODEL 39BS24,28,36,40,48,60,72,84,96,108 AND 120
CAUTION: Disconnect supply service to baseboard to avoid electrical shock.
All wiring connections must conform to the National Electric Code and local codes having
jurisdiction.
NOTE:The baseboard blank section mounts against the wall similar to the baseboard. When making
wiring connection: for wiring a single baseboard and the supply is through the blank section or
when wirng for continuous parrallel connections for multiple baseboard installation, then a wire-
way adapter must be used. (See wireway adapter instructions).
1. Remove appropriate junction box covers from the baseboard(s) and blank section.
2. Remove knockouts from junction boxes as required and insert snap bushing(s) Attach green ground
lead(s) from blank section to baseboard for continuity of ground.
3. Wire baseboard(s) as required and install covers.
5. Restore power and check for proper operation.
8931 - REV. 110706
IMPORTANT: OWNER SHOULD RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
BLANK SECTION
ELEMENT
OVER TEMP. LIMIT CONTROL
GND
LEFT JUNCTION BOX
GND
RIGHT JUNCTION BOX
LEFT JUNCTION BOX RIGHT JUNCTION BOX
CRIMP
NUT
ELEMENT
TEMP.
LIMITING
DEVICE
SHOWN WIRED LEFT END
GND
BLANK SECTION
GND
GND
L/H JUNCTION BOX R/H JUNCTION BOX
CRIMP
NUT
ELEMENT
TEMP.
LIMITING
DEVICE
GND
GND
SUPPLY
WIRE
NUT
WIRE
NUT
WIRE
NUT
L/H JUNCTION BOX R/H JUNCTION BOX
BLANK SECTION
SUPPLY
LEFT JUNCTION BOX RIGHT JUNCTION BOX
GND
WIREWAY ADAPTER
GND
3700 SERIES BASEBOARD
L/H JUNCTION BOXR/H JUNCTION BOX
GND
GND
BLANK SECTION
GND
GND
L/H JUNCTION BOX R/H JUNCTION BOX
GND
GND
L/H JUNCTION BOX R/H JUNCTION BOX
CRIMP NUT
WIRE NUT
GND
GND
3900 SERIES BASEBOARD
SUPPLY
LEFT JUNCTION BOX RIGHT JUNCTION BOX
GND
GND
WIREWAY ADAPTER
L/H JUNCTION BOXR/H JUNCTION BOX
CRIMP
NUT
ELEMENT
TEMP.
LIMITING
DEVICE
GND
ELEMENT
OVER TEMP. LIMIT CONTROL
CRIMP NUT
ELEMENT
OVER TEMP. LIMIT CONTROL
CRIMP NUT
SUPPLY