Product Manual

11 GAUGE PERFORATED
STEEL HOUSING POWDER
COATED WITH TEXTURED
IVORY FINISH
AIR FLOW
ACCESS DOOR FOR
OPERATIONAL
ADJUSTMENTS
INSTALLATION:
1. WHENEVER INSTALLING OR SERVICING THIS EQUIPMENT, BE SURE THE POWER IS OFF AT THE MAIN BREAKER OR SWITCH.
2. ALL WIRING MUST CONFORM TO LOCAL AND NATIONAL CODES.
3. DO NOT INSTALL A HEATER NEAR WATER OR IN A CORROSIVE OR EXPLOSIVE ATMOSPHERE, NOR ON OR NEAR HIGHLY
FLAMMABLE MATERIAL SUCH AS PAPER OR FIBER BOARD INSULATION TYPE PRODUCTS.
4. HIGH TEMPERATURE: KEEP ELECTRICAL CORDS, FURNITURE, DRAPERIES OR ANY OTHER BLOCKING MATERIAL AWAY FROM
THE TOP OR FRONT OF THE HEATER.
5. BE SURE THE SUPPLY VOLTAGE IS THE SAME AS WHAT IS LISTED ON THE HEATER NAMEPLATE.
9878
BASE UNIT MODEL DESIGNATION:
H 880 5 125
1 2 3 4
DIGIT 1. VOLTAGE: E=120, F=208, G=277, H=240, L=346, P=480, U=600
DIGIT 2. MODEL SERIES
DIGIT 3. UNIT LENGTH IN INCHES: 1=18, 2=28, 3=36, 4=48, 5=60, 6=72
DIGIT 4. UNIT WATTAGE: 050=500, 075=750, 100=1000, 125=1250, 150=1500, 200=2000
WARNING: READ COMPLETE INSTRUCTIONS AND PRECAUTIONARY STATEMENTS BEFORE INSTALLING HEATERS.
CAUTION: DO NOT OPERATE HEATER WITH FRONT COVER REMOVED. THIS HEATER GENERATES HIGH TEMPERATURES.
KEEP ELECTRICAL CORDS, DRAPES AND OTHER FURNISHINGS AWAY FROM HEATER.
INSTALLATION INSTRUCTIONS
INSTITUTIONAL WALL
CONVECTOR SERIES 8800
CAUTION: HAZARD OF ELECTRICAL SHOCK. DISCONNECT ALL POWER BEFORE SERVICING.