Product Manual
FORM 8429 ECO 1-7137 2/16
6.
Install the grille using the hex key provided in
the parts package. The mounting screws are
captured in the grille.
7.
Install the tamperproof cover if required. Insert
the bottom ange behind grille frame and
secure the top with the same tamper resistant
screws attaching the control cover.
SET-UP AND OPERATION
Note: The SD thermostat is pre-programmed at the factory.
Programming cannot be eld modied.
When power is applied the back light will ash on.
MODE
Press the mode button until ‘Heat’ is displayed on the screen.
TEMPERATURE SETTING
Press the up or down buttons to change temperature to desired setting.
FAN
Press the fan button to choose ‘Auto’ or ‘On’. In the auto position the fan cycles with the thermostat. In
the on position the fan will run continuously.
ECONOMY/COMFORT
Select either the economy or comfort mode.
The economy mode allows the thermostat to automatically
go into the economy mode if the occupancy sensor does not detect movement for one hour.
Note: The
Sensor switch must be in the ‘ON’ position to automatically switch between Comfort and Econ-
omy.
SET ECONOMY OFFSET
The offset range is 0-12 Deg. F. Adjust the offset range by sliding the the offset switch up to the desired
value. The offset will be displayed on the screen.