Item Brochure

75
Electric Infrared Heating Controls
Pre-Wired Contactor Panels
FPC2120
• Factory pre-wired for quick installation,
with the following optional equipment:
Snow & Ice Detector (APS-3C)
Single & Two-Stage Thermostats
Two-stage thermostats require a
minimum 2-contactors.
Note: Contact factory for 3R, 4, 4X, & NEMA 12 “special” built models.
• Step-down transformer and secondary
fusing for 24V or 120V control circuit.
• 3-Phase load rated.
• Fuses are NOT included.
• NEMA 1 Enclosures.
• Max 50-Amp branch circuit fusing.
IMPORTANT FUSING INFORMATION
Fuses are NOT included since panels can be used with various infrared heat sources. Quartz
Lamp Heat Sources: Use FRS-600V (or equal) “Time Delay” fuses; Class RK-5. Quartz Tube
& metal Sheath Heat Sources: Use KTS-R 600V (or equal) “Fast Acting” fuses; Class RK-1.
Fuse circuits as close to calculated load as possible. Circuits less than 35 Amps will require the
use of fuse reducers.
Manufactured in U.S.A.
Portable Electric Infrared Heat Panels
HP-11-QT
• Portable panels are built to withstand rigors of industrial and heavy-commercial applications,
such as auto collision repair shops.
• 20 Gauge Steel frame, base, and housing construction.
• 3” Steel casters for high stability and ease of mobility
• Gold anodized Aluminum reectors and end caps allow 10% faster cure time than polished
Aluminum reectors, especially in paint and dust-laden atmospheres.
• Elements achieve full temperature in less than 2 minutes
• Fused disconnect switches are installed on the back of each unit.
• Units are positioned with adjustable hinges allowing the user to use direct heat more precisely
to the target area.
• Gentle but effective medium-wave radiant heat can quickly boost, ash-off, or cure a variety
of nishes, and lessens the chance of blistering and/or overheating the coating.
• Medium-wave infrared heating elements are also effective for ash-off of water-based clear
coatings being mandated by environmental agencies in many states.
Features
Standard Models
General Curing Guidelines
Note: Curing times will vary depending on material and shop conditions. This chart is based on distances of 18-24” away from the target area.
Material Type
Solvent Based
Primer
Water Based
Primer
Two Component
Primer
Water Based
Clear Coat
Acrylic enamel &
Polyurethane Clear Coat
Urethane Clear Coat &
High Solids Top Coat
Curing Time 3-5 mins 3-6 mins 8-20 mins 3-10 mins 12-30 mins 10-30 mins
HP-5-QT
120-V Control System 24-V Control System
Max. Amps Volts
Cabinet Size (In.)
WT.
(Lbs.)
LIST
UPC#
686334
Model
UPC#
686334
Model Depth Width Height
4459902 FPC8110 4864302 FPC8210
50
208
6.75 16 24 52
1752
4460002 FPC2110 4864402 FPC2210 240
4460102 FPC7110 4864502 FPC7210 277/480 1891
4460202 FPC4110 4864602 FPC4210 480 1752
4460302 FPC8120 4864702 FPC8220
100
208
6.75 16 24 70
2142
4460402 FPC2120 4864802 FPC2220 240
4460502 FPC7120 4864902 FPC7220 277/480 2336
4460602 FPC4120 4865002 FPC4220 480 2142
4460702 FPC8140 4865102 FPC8240
200
208
6.75 24 30 88
3143
4460802 FPC2140 4865202 FPC2240 240
4460902 FPC7140 4865302 FPC7240 277/480 3337
4461002 FPC4140 4865402 FPC4240 480 3143
4461102 FPC8160 4865502 FPC8260
300
208
6.75 30 36 106
3865
4461202 FPC2160 4865602 FPC2260 240
4461302 FPC7160 4865702 FPC7260 277/480 4061
4461402 FPC4160 4865802 FPC4260 480 3865
UPC#
Model WATTS VOLTS AMPS
HEAT
SOURCES
CABLE
TYPE (20’)
Dimension (In.) Heated Area (In.)
Wt. LIST
686334
Width Height Width Height
884129 HP-5-QT 4,800
240
20 4
12-3 SO
44-5/8
56-1/2
40
44
116 2725
884136 HP-6-QT 6,400 26.7 4
66-5/8 61
141 3150
884143 HP-11-QT 11,200 46.7 7 6-3 SO 89-1/2 77 225 5800