Item Brochure

23
5600 Series Multiple Wattage Fan Forced Unit Heater
WARNING: This product can expose you
to chemicals including nickel which is known
to the State of California to cause cancer,
and chromium, which is known to the State
of California to cause birth defects and/or
reproductive harm. For more information go
to www.P65Warnings.ca.gov.
!
Product Specications
CASING & CONSTRUCTION:
Fabricated of die formed, heavy gauge
steel and nished with two tone, brown
and beige, durable powder coated paint.
Supply air is drawn through the rear heavy
duty expanded steel inlet grill. Heated
air is discharged through front adjustable
louvers, which are spring loaded for
individual adjustment. Made in U.S.A.
ELEMENT: Heavy-duty block n
element design. The multiple tap electric
connection design allows eld conversion
to eight wattage settings at 208/240-Volt
single phase or 240/480 Volt, 3 phase.
Units are available on special order with a
specic wattage/voltage setting.
MOTOR: Motor shall be totally enclosed,
permanently lubricated, all angle industrial
rated with thermal overload protection.
WIRING: Wiring to terminal block
adjacent to incoming knockout in
accordance with NEC and local codes.
THERMAL OVERLOAD: All heaters shall be equipped with
an automatic reset thermal cutout to shut down the element and
motor circuits if unsafe operating temperatures are exceeded.
CONTROLS: The heater shall have a heavy-duty hydraulic thermostat (with a temperature range of 40
o
F-110
o
F)
factory installed and wired. All controls and wiring shall be in a large wiring compartment with hinged door for
easy access. An optional disconnect switch shall be available for eld installation.
MOUNTING: Heaters are standard with a three position-mounting bracket for wall, ceiling or workbench. Heaters
can be mounted for horizontal or vertical discharge. Note: Minimum mounting height is 6 feet, and minimum
distance from side of heater to nearest wall is 6 inches. Note: Approved for residential applications.
Standard Models
Product Dimensions
Front view
A B C D E F G
14” 12
11
⁄16” 14” 1
9
⁄16” 1
9
⁄16” 9” 2
3
⁄4”
Product Specications
MFG
CATALOG
NUMBER
MFG
MODEL
NUMBER
WATTS BTUs VOLTS PHASE AMPS
TEMP
RISE
AIR
THROW
CFM
WT.
(LBS)
LIST
07072802 HF5605T
5000 17065
240 1
21 57
o
F
16' 275 32
921
4165 14215 17 48
o
F
3332 11365 14 38
o
F
2500 8533 10 29
o
F
3750 12798
208 1
18 43
o
F
3123 10659 15 36
o
F
2500 8553 12 29
o
F
1874 6396 9 21
o
F
07072902 H3H5605T
3750 12799 208 3 10.4 43
o
F
991
5000 17065 240 3 12 57
o
F
07073002 P3P5605T 5000 17065 480 3 6 57
o
F
07073602 DCS-MT303 Optional Field Installed Disconnect Switch, 30 Amp @ 600Volts
84
For 24V control on single phase models delete "T" sufx
178