Cut Sheet

20
Guard Mounted Direct Drive Exhaust Fans
Features
• Bolts directly to the wall
• Can be used with or without external shutter
• Pull chain switch
• No Cord-Junction box provided for direct wiring
• Aluminum blade
• Steel spiral wire guards
Note: Rough-in hole size is 1/2” inch larger than fan blade size
• 120V, 1-Phase, totally enclosed, permanently lubricated
• 1/12 HP motor is 3-Speed sleeve bearing permanent split capacitor
• 1/8 HP motor is 3-Speed sleeve bearing permanent split capacitor
• 1/4 HP motor is 2-Speed ball bearing permanent split capacitor
Motor Specications
Standard Models
Dimensions (Inches)
Optional Wall Shutters
SIZE
BOLT HOLE
CENTER WIDTH
DEPTH
10” 14.14” 5.81”
12” 16.46” 7.18”
14” 18.30” 7.18”
16” 20.34” 7.18”
18” 22.64” 7.18”
20” 25.46” 7.18”
24” 29.08” 7.18”
30” 34.89” 7.18”
Front View
Rear View
DEPTH
BOLT HOLE CENTER DIAMETER
ø
FAN
SIZE
UPC#
686334
MODEL HP
CFM / RPM
AMPS
HIGH
WT.
(LBS)
LIST
HIGH MED LOW
10” 868952 CE 10-D 1/12 680 / 1560 540 / 1250 460 / 1080 1 11 249
12” 798501 CE 12-D 1/12 825 / 1560 710 / 1250 560 / 1080 1.1 12 281
14” 868969 CE 14-D 1/8 1520 / 1660 1400 / 1550 1250 / 1370 2 17 298
16” 868976 CE 16-D 1/8 2100 / 1660 1900 / 1550 1700 / 1370 2.1 18 313
18” 798495 CE 18-D 1/8 2300 / 1660 2100 / 1050 1850 / 1370 2.2 19 344
20” 868983 CE 20-D 1/4 2925 / 1140 - 2380 / 1070 2.3 34 447
24” 798488 CE 24-D 1/4 3400 / 1140 - 2770 / 1070 2.5 38 497
30” 798471 CE 30-D 1/4 3950 / 1140 - 3080 / 1070 2.7 42 580
FAN SIZE
UPC#
686334
MODEL
WT.
(LBS)
LIST
10” 868433 CES-10G 5 66
12” 798556 CES-12G 5.5 92
14” 868457 CES-14G 6.5 111
16” 851473 CES-16G 8 130
18” 798563 CES-18G 9 158
20” 797528 CES-20G 10 175
24” 798570 CES-24G 13 195
30” 798587 CES-30G 19 228