User Manual

GENERAL SPECIFICATIONS
(Continued)
HARMONIC AND SPURIOUS ATTENUATION: Meets or exceeds FCC
requirements.
IMPEDANCE: Input: 50Ù.
Output: 50 Ù.
RF CONNECTORS: Input: SO-239 (case marked:
“RF IN”).
Output: SO-239 (case marked:
“RF OUT”).
DC INPUT CONNECTOR Cinch 4 pin male (case marked:
“13.8VDC”).
RECEIVER PATH INSERTION LOSS (36-42 MHZ): 1 dB maximum.
CONFIGURATION: All mobile amplifiers are
supplied with solid state Carrier
Operated Relay (COR).
OPERATING TEMPERATURE RANGE: -20 to +50 C / Ambient.
STORAGE TEMPERATURE: -40 to +85 C.
OPERATING HUMIDITY: 0 to 85% RH (non-condensing).
STORAGE HUMIDITY: 0 to 95% RH (non-condensing).
OPTIONS
TPL Communications’ Low Band VHF Mobile Power Amplifiers are available with several options:
input, output, frequency ranges and configurations, special logos, etc., when specified at the time of
order. We work closely with you, our customer, to develop products that are in complete compliance
with your needs and specifications.
CAUTION!
Inspect the amplifier thoroughly upon receipt for visible damage. If any is noticed, please call TPL
Communications at 800 HI - POWER to request an RMA (Return Material Authorization) number. If
purchased through a dealer or distributor, ask them to also follow this procedure for best results.
EXPENSIVE COMPONENTS MAY BE DESTROYED IF THE AMPLIFIER IS TURNED ON
IN A DAMAGED CONDITION
Page 3