User's Manual

ENVIRONMENTAL CHARACTERISTICS
Parameter Symbol Min. Typ. Max. Unit Condition
Operating Temperature T
O
-20 +50 °C
Storage Temperature T
S
-40 +85 °C
Operating Humidity H
O
0 85 %
relative, non-condensing
Storage Humidity H
S
0 95 %
relative, non-condensing
MECHANICAL PROPERTIES
Parameter Value Units Limits Condition
Dimensions 9.5 L x 3.0 H x 4.5 W inch max
Weight 4 lb max
RF Connectors, In/Out UHF (SO-239) Type N optional
DC Connector Cinch 4-pin male
Cooling Convection
NOTES:
1. The rated output power of this amplifier is for single carrier operation.
For situations when multiple carrier signals are present, the rating would
have to be reduced by 3.5 dB, especially when the output signal is re-
radiated and can cause interference to adjacent band users. This power
reduction is to be by means of input power or gain reduction and not by
an attenuator at the output of the device.
OPERATING VOLTAGE:
Nominal DC operating voltage is 13.8VDC and the specifications are given
at this voltage, as measured at the DC input connector. Reduced DC input
voltage will result in lower output power and efficiency.
EIA DUTY CYCLE:
NOTE: Use of TPL Mobile Amplifiers above the recommended duty cycle
or in repeater applications is not recommended and voids the warranty.
CONFIGURATION:
All mobile amplifiers are supplied with Solid State Carrier Operated
Relay (SSR).