Installation Manual

IPS_Beacon –

Installation Guide

NI_IPS_BEACON_MULTI_V1.0.0

1 - Unpack and verify contents :

Please make sure that the following contents are included in the package

2 - Startup instructions

Please remove insulation tape before using

3 - How to use :

Download the IPS Beacon Configuration App from Google Play or from your personal account on www.tplsystemes.com.

The blue Led is blinking slowly. Press on the rear button for th first time connection. The Led becomes red and IPS-Beacon is

connectable during 30s. You can now press the button CONNECT in the App to establish the connection. The 2 leds (red and blue)

lighted-up, the screen for parameters setting is displayed and you can change user parameters.

Insulation tape

Rotate the screw 90°

clockwise to lock

Keep the screw on OPEN position,

then insert the screw to this hole

and push the battery door

Go down until the locking

Press to unlock and move

up to release the device

IPS-Beacon

Install the holder using 2 screws

Rear button

Bi-color Led

Wall mount

holder

IPS-Beacon

2 screws

2 wall plug

1 Li-SOCI

battery

Install the device into the holder