Product Info

TQ Aviation KTX2.0300
EASA.AP445 MAN
KTX2.A-MAN.0202.en._FCC geändert.docx Page 32 of 49
© TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties
requires the prior written consent of TQ-Systems GmbH.
When settings have been done, leave the menu by moving the cursor to the upper line by
rotating the rotary knob and push.
3.1.4.5. Select Length/Width
After entering the “length/Width” menu, the following screen appears.
The values to be entered are in meters (rounded) for example:
Aircraft length is 7,5m, the entry shall be 08.
Aircraft width (wingspan) is 9,4m, the entry shall be 09.4
When the correct value has been entered, leave the menu by moving the cursor to the upper
line by rotating the rotary knob and push.
3.1.4.6. GNSS Antenna Offset
Within the antenna offset menu, the longitudinal and lateral position of the GPS Antenna is to
be entered. While mainly important for large aircraft, the values can be entered for small air-
craft as well.