Product Info

TQ Aviation KTX2.0300
EASA.AP445 MAN
KTX2.A-MAN.0202.en._FCC geändert.docx Page 41 of 49
© TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties
requires the prior written consent of TQ-Systems GmbH.
Connect the static air connection on the back of the transponder to the static port and
ensure a tight connection with a suitable hose clamp.
5.1.5. Interface
A GPS source can be connected to the serial interface (RS232) providing GPS position
data (Extended Squitter) for use of ADS-B out.
Requirements:
• Required GPS hardware:
o NexNav Mini (Part-No. 21.000) which turns the units into FAA 2020 man-
date compliant device as required for TC’d aircraft.
or
o Standard NMEA0183 RMC data stream including the RMC-sub-format
(4800/9600/38400 Baud).
• GPS hardware needs to be connected to pins 2 and 13. Power supply needs to
be provided separately considering the required operating voltage for the GPS
hardware.
Note:
For Connection to the NexNav Mini, a proprietary cable is available from TQ. Please
contact you dealer for more information.
If a standard NMEA0183 WAAS GPS source is sufficient for your aircraft (LSA, Ex-
perimental, Ultralight etc.) you should consider recommended brands by TQ to avoid
incompatibilities or malfunctions.
The WAAS GPS hardware used needs to be selected in the setup menu (see chap.
3.1.4.4).