Product Info

TQ Aviation KTX2.0300
EASA.AP445 MAN
KTX2.A-MAN.0202.en._FCC geändert.docx Page 47 of 49
© TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties
requires the prior written consent of TQ-Systems GmbH.
9. Maintenance
9.1. Periodic Maintenance
The KTX2 Mode-S Transponder has been designed and manufactured to allow “on condition
maintenance”. This means that there are no periodic service requirements necessary to
maintain continued airworthiness, and no maintenance is required as long as it does properly
perform its intended function. When service is required, a complete performance test shall be
accomplished following any repair action. Repairs shall only be carried out in accordance
with TQ-Systems GmbH service procedures.
9.2. Repair
Only exchange and flat repair of the equipment is permitted. In case of equipment malfunc-
tion, the unit must be sent to the manufacturer. Refer to section “1.2 Customer Service”.
9.3. Cleaning
Clean the display only with, lint-free cloth and an eyeglass lens cleaner that is specified as
safe for anti-reflective coatings.