Installation Guide

Title:
Access Management
Keypad Installation Guide
PN:
xxxxxx
Page:
8 of 14
Author:
Christopher R. Boltë
VER:
2.4
Date:
May, 2019
Access Management Keypad
Installation Guide
Label on back
side
Figure 1: Keypad Serial Number Label
5. Keypad Mounting
Refer to Figure 2, 3 and 4 below to understand how the keypad should be mounted on the surface
selected in section 3. Take the following steps to complete the keypad mounting.
1 In. Dia. Hole
1 In.
Figure 2: Front View of Keypad Mounted
Figure 3: Rear View of Keypad Mounted
a. With the keypad harness tucked into the channel on its back side, place and hold the keypad
on the mounting surface to mark the location of the mounting holes to be drilled (Figure 2, 5)