Your Device Parts Activation Website – http://app.trackimo.
ENGLISH What's in the box This Quick Start Guide, Product Safety and Warranty booklet are also included. • If any item is damaged or missing, contact your point • of purchase for assistance. • Use only approved accessories. • Accessories may vary by country or region. Charge the Device Connect one end of the USB cable to the charger port 2 and the other end to a USB power adaptor. Then connect the USB adapter to a power outlet. You can also connect the USB cable to a computer.
Note: sometime such emails might be mistakenly caught in the SPAM folder - look there too. Turning on your device Before activating your device on the web, you must charge the device and turn it on. connect the USB cable to the USB lot in the side of the device, and connect it to any standard phone charger or to the USB slot of a computer. The initial charging time should be at least 8 hours. Then, you have to turn it on. The device usually turns itself on when connected directly to power.
This will cause the SOS alert to be sent, with the exact location of where it was pressed. NOTE: You can turn the “beep” sounds off, in case you want the device to send a “silent alarm” from the Settings in the Trackimo app or website. Who receives the alert? The alert always sends an email message to the email of your account, and if you entered a phone number when you activated the device, it will also be sent by SMS to that number. You can easily add more people who will receive the SOS alert.
You set up a fence by clicking the "fences" link on the website, just below the "settings" links, and click "create a new fence". The fence will appear on the map as a rectangle at the center, and you can change its size and position by grabbing its corners with the mouse and dragging them where you want. You can also set the center of the fence by entering an address in the addresssearch area. Then you give your fence a name and save it.
