manual - 80A turbo ESC

Hextronik Water Proof-80A Set Manual

Note: For proper ESC operation, please adjust transmitter as follows

a. Set High EPA or ATV to maximum setting; max throttle

b. Set Low EPA or ATV to maximum setting; max brake

c. Set throttle trim in the middle position

d. Set throttle Exponential to Zero.

e. Set Throttle mode F50/B50 for Practice Mode.

f. Set Throttle mode F70/B30 for Racing Mode.

Transmitter Calibration:

- Auto Calibration

Default Settings:

Battery Type - Lipo Auto Detect

Operation Mode - Forward /Reverse

Initial Brake - 10%

Drag Brake - Off

Motor Timing - Normal

Acceleration - Low

Forward Limit - 100%

Reverse Limit - 80%

Drive Frequency - 8KHz

Dead Band - 2

Rotation Reverse - Normal

What LED show?

A、Blue and Orange LED on for Forward with Reverse.

B、Orange LED on for Forward only.

C、As Battery voltage get to warning point, Blue LED blink.

D、Orange LED flash for into temperature protection.

E、Yellow LED blinking for non-timing mode on.

Hextronik 10TH Water Proof-80A Set Manual

PAGE 1
Hextronik Water Proof-80A Set Manual Note: For proper ESC operation, please adjust transmitter as follows a. Set High EPA or ATV to maximum setting; max throttle b. Set Low EPA or ATV to maximum setting; max brake c. Set throttle trim in the middle position d. Set throttle Exponential to Zero. e. Set Throttle mode F50/B50 for Practice Mode. f. Set Throttle mode F70/B30 for Racing Mode.
PAGE 2
Hextronik 10TH Water Proof set Flow chart Hextronik Program Box V02 BOX 10TH Water Proof Ver: xx xx xx BOX Battery Type Nimh/Nicd 、 Lipo Auto Detect Operation Mode Forward /Reverse 、 Forward Only Initial Brake 10%、20%、30%、40%、45%、50%、55%、60%、65%、70% Drag Brake Off、5%、10%、15%、20%、25%、30%、35%、40%、45% Motor Timing Low 、 Normal 、 High Acceleration Low 、 Mediu 、 High Forward Limit 10%、20%、30%、40%、50%、60%、70%、 80%、90%、100% Off Reverse Limit 10%、20%、30%、40%、50%、60%、70%、 80%、90%、100% Dirve Frequenc